> ## Content Index
> Fetch the complete content index at: https://3dprintedgaragekits.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# Regina by 3Dmoonn - Kit Overview
- URL: https://3dprintedgaragekits.com/3dmoonn-regina/
- Published: 2026-11-17T23:27:57.000Z
- Updated: 2026-11-17T23:27:57.000Z
- Description: 3Dmoonn's Regina from Dino Crisis: a 23-part full figure on a wrecked-facility base with a green-lit monitor, plus a two-file bust. Written from the files and renders before printing.
- Author: Rin Stout
- Tags: 3Dmoonn, Kit Overview, Fan art, Dino Crisis, 9–12 Inches, Advanced, #kit-import-2026-11-16, #open-items

Regina, from *Dino Crisis*, by 3Dmoonn. What stands out in this kit is the base: seven scenery parts build a wrecked facility wall with a glowing monitor, a rusted truss and vines that gives the figure a full diorama to stand in.

This post is written from the studio's files and the seven renders. I have not printed it yet. Everything below can be checked against the download, and the ratings are estimates.

## At a glance

- **Studio:** 3Dmoonn
- **Character and source:** Regina, *Dino Crisis* (video game)
- **Section:** Fan art
- **Versions and sizes:** Standard version, roughly 250 × 150 × 150 mm (H × W × L) assembled, from the STL bounding boxes. Bust, roughly 140 mm tall with the standard head and hair on top, also from the bounding boxes. 3Dmoonn gives no dimensions in the download, so these come from the meshes.
- **Size note:** The studio doesn't give an assembled height for this kit. The height here, about 9 to 12 inches, is my estimate from the STL files.
- **Parts per version:** Standard 23 raw STLs (13 figure, 7 base, 3 plants). Bust 2 STLs.
- **Presupports:** Standard version only, in `pre-support/`: 23 presupported STLs plus one Lychee scene, `pre-support.lys`. The bust has no presupports.
- **Largest part and plate fit:** Standard, raw: `base_pt7.stl` at 127.1 × 57.7 × 142.3 mm; all 23 raw parts fit Mars-class and Saturn-class, but `base_pt1.stl`, `base_pt2.stl`, `base_pt3.stl` and `base_pt7.stl` fit Mars-class only on edge, and `base_pt7.stl` fits Saturn-class only on edge. Standard, presupported: `base pt1.stl` at 158.2 × 56.4 × 90.1 mm by bounding box; it, `base pt2.stl` (147.8 × 58.6 × 95.2 mm) and `base pt7.stl` (128.8 × 90.7 × 142.3 mm) are the three presupported parts that do not fit Mars-class as supplied, and every part fits Saturn-class. Bust: `bust_base.stl` at 70.4 × 56.6 × 58.8 mm; both parts fit Mars-class.
- **Ratings (estimated):** Standard — Print 3/5, Assembly 4/5, Paint 4/5 (advanced). Bust — Print 2/5, Assembly 2/5, Paint 3/5 (intermediate).
- **Status:** files reviewed, not printed.
- **Where to get the files:** [3Dmoonn on Patreon](https://www.patreon.com/3Dmoonn?ref=3dprintedgaragekits.com). The render footers name a store as well.

## The model

Regina stands with her weight on her straight left leg, the strapped right leg bent and crossed loosely in front of it, in a relaxed, off-duty kind of stance. Her right hand rests on top of a pump-action shotgun whose stock is propped against the broken panel beside her, the barrel pointing down and forward. Her left hand comes up to her collar, fingers curled near the zip pull. She looks straight at the viewer with a small closed-mouth smile. It is a posed, confident portrait rather than an action scene, and the gun is a prop she leans on rather than something she is aiming.

The identifying details are all here. The short red bob with long side bangs, the grey tactical bodysuit with a centre-front zip that runs from the high collar down to the crotch, the black vest and harness over it, and the shotgun-shell bandolier. Freckles are modelled across her nose and cheeks, visible in the close-up render (`6.png`), with brown eyes and thin dark brows.

Costume, piece by piece, as the renders show it. The bodysuit is a mid grey with a leather-like grain and a lighter grey panel across the upper chest above the zip; the sleeves are the same grey down to the wrist. Over it sits a black leather vest with shoulder straps and buckles that continue over the shoulders and cross the back (`4.png`), with short dark grey cap sleeves at the shoulders. A black bandolier belt runs under the bust holding six shotgun shells, alternating red and yellow with brass bases. At the waist is a wide grey belt with a large silver buckle, with black pouches on both hips. Her gloves are black and fingerless, with a cuff strap at the wrist. On her right thigh are two black straps with silver buckles and a black holster below the hip; both knees have black riveted knee pads; the boots are black lace-up combat boots with a strap across the ankle. The skin showing is limited to the face and neck.

The base is the other half of the kit. She stands on an octagonal metal slab with a grating top, a yellow-and-black hazard stripe running around its edge, rust and patches of green moss, sitting on a lower round rusted ring with pipes and corner blocks (`7.png`). Behind her rises a tall, torn sheet-metal panel with a small green-lit monitor set into it, a section of rusted truss girder to one side, and a second leaning panel on the other side where the shotgun rests. Vines wrap the panels and truss, and broad-leaf plants and spiky fronds fill the foot of the scene. The jungle facility behind her in the renders, including the dinosaur silhouette in the window, is the render backdrop and not part of the kit. The silhouette is tall and narrow: the figure, the panel behind her and the truss all rise from a footprint about 150 mm across, so the scenery is what carries the footprint and most of the height.

## Versions and sizes

- **Standard**
  - H × W × L (approx., from bounding boxes): roughly 250 × 150 × 150 mm
  - Pieces: 23
  - Presupported: Yes — 23 STLs + `pre-support.lys` (Lychee)
- **Bust**
  - H × W × L (approx., from bounding boxes): roughly 140 mm tall with the standard head and hair; the two bust files are 70.4 × 56.6 × 58.8 mm and 66.1 × 52.2 × 42.4 mm
  - Pieces: 2 (+ head and hair, see below)
  - Presupported: No

The height is a rough figure from the raw parts: `leg_R.stl` is 131.3 mm long, `normal_torso.stl` 89.0 mm, `head.stl` 40.1 mm, less the overlap at the joints, plus the base slab. The footprint comes from the two base slab parts at 147.5 and 147.8 mm across.

The standard version suits anyone who wants the full diorama and has the plate for a kit with seven base parts, most of them large solid pieces. The bust suits a shorter print and a paint exercise on the face, hair and harness, without the scenery.

**About the sizes.** Every measurement in this post comes from the sculptor's files or the studio's published size information for the unprinted model. A printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

## What's in the download

### Standard version — raw STLs (`standard version/`)

All 23 raw files are build parts. I found no alternates or split-versus-whole pairs in this folder.

**Figure**

- **`head.stl`**: Head, face and neck
  - Size mm (X × Y × Z): 21.2 × 40.1 × 27.9
  - Notes: Hair is separate
- **`hair_pt1.stl`**: Hair section
  - Size mm (X × Y × Z): 31.3 × 39.5 × 16.2
  - Notes: Thin, two-part hair
- **`hair_pt2.stl`**: Hair section
  - Size mm (X × Y × Z): 35.4 × 36.6 × 24.9
  - Notes: Thin, two-part hair
- **`normal_torso.stl`**: Torso with vest, harness, bandolier and belt
  - Size mm (X × Y × Z): 57.2 × 89.0 × 44.4
  - Notes: `normal_` prefix is the studio's naming
- **`arm_L.stl`**: Her right arm
  - Size mm (X × Y × Z): 35.7 × 41.4 × 39.0
  - Notes: Viewer-side name
- **`arm_R.stl`**: Her left arm, bent up to the collar
  - Size mm (X × Y × Z): 28.2 × 35.0 × 32.2
  - Notes: Viewer-side name
- **`hand_12.stl`**: Hand with the shotgun, by its 110.8 mm length
  - Size mm (X × Y × Z): 21.6 × 110.8 × 14.8
  - Notes: Long and thin; barrel is fragile
- **`hand_R.stl`**: Her left hand, the raised one at the collar
  - Size mm (X × Y × Z): 22.1 × 17.3 × 19.5
  - Notes: Tiny. Viewer-side name
- **`leg_L.stl`**: Her right leg, bent and crossing in front, with the thigh straps
  - Size mm (X × Y × Z): 57.2 × 119.9 × 54.2
  - Notes: Viewer-side name
- **`leg_R.stl`**: Her left leg, straight, weight-bearing
  - Size mm (X × Y × Z): 30.0 × 131.3 × 36.6
  - Notes: Longest figure part. Viewer-side name
- **`feet_L.stl`**: Boot
  - Size mm (X × Y × Z): 28.0 × 51.1 × 35.2
- **`feet_R.stl`**: Boot
  - Size mm (X × Y × Z): 17.2 × 43.2 × 38.1
- **`holster.stl`**: Thigh holster
  - Size mm (X × Y × Z): 19.7 × 28.9 × 28.2
  - Notes: Small

**Base and scene**

- **`base_pt1.stl`**: Base slab section
  - Size mm (X × Y × Z): 147.5 × 25.2 × 76.4
  - Notes: Large flat slab
- **`base_pt2.stl`**: Base slab section
  - Size mm (X × Y × Z): 147.8 × 25.2 × 88.1
  - Notes: Large flat slab
- **`base_pt3.stl`**: Scenery section
  - Size mm (X × Y × Z): 115.5 × 131.6 × 50.9
- **`base_pt4.stl`**: Scenery section
  - Size mm (X × Y × Z): 50.2 × 98.1 × 46.5
- **`base_pt5.stl`**: Scenery section
  - Size mm (X × Y × Z): 74.2 × 93.2 × 61.0
- **`base_pt6.stl`**: Scenery section
  - Size mm (X × Y × Z): 79.0 × 121.0 × 69.3
- **`base_pt7.stl`**: Tallest scenery section
  - Size mm (X × Y × Z): 127.1 × 57.7 × 142.3
  - Notes: Largest part in the kit
- **`plant_1.stl`**: Broad-leaf plant
  - Size mm (X × Y × Z): 78.8 × 65.4 × 97.1
  - Notes: Thin leaves
- **`plant2.stl`**: Broad-leaf plant
  - Size mm (X × Y × Z): 45.8 × 69.9 × 59.4
  - Notes: Thin leaves
- **`plant_3.stl`**: Broad-leaf plant
  - Size mm (X × Y × Z): 53.0 × 65.6 × 55.1
  - Notes: Thin leaves

The parts `base_pt3.stl` to `base_pt7.stl` are the wall panel, monitor housing, truss and vine sections seen in the renders; I cannot tell from the renders alone which numbered part is which piece of scenery.

**Presupported (`standard version/pre-support/`).** All 23 parts have a presupported copy and there is one Lychee scene, `pre-support.lys`, for the set. The presupported names use spaces where the raw names use underscores (`leg L.stl` for `leg_L.stl`, `base pt1.stl` for `base_pt1.stl`), `normal_torso.stl` becomes `torso.stl` (the presupported copy drops the `normal_` prefix), and the three plants become `plant 1.stl`, `plant 2.stl` and `plant 3.stl` where the raw folder has the inconsistent `plant_1.stl`, `plant2.stl` and `plant_3.stl`. The pairs show which parts the studio hollowed: `base pt7.stl`, `base pt1.stl`, `base pt2.stl`, `base pt5.stl`, `base pt4.stl`, `leg L.stl`, `leg R.stl`, `torso.stl` and `head.stl`. The small parts and the plants come out heavier than raw (the extra is supports), so those are supported solid. Two presupported files have degenerate triangles, 448 in all: `holster.stl` 224 and `plant 2.stl` 224\. The raw standard files and the two bust files are clean.

**Anything odd.** Nothing beyond the naming: the underscore-to-space change, the dropped `normal_` prefix, the `plant2` versus `plant_1`/`plant_3` inconsistency, the `hand_12` name, which does not follow the L/R pattern of the other pairs, and the L and R in the arm, hand and leg names, which are from the viewer's side: `leg_L.stl` is her right leg.

### Bust (`bust/`)

- **`bust_normal_torso.stl`**: Bust torso, chest to cut line
  - Size mm (X × Y × Z): 66.1 × 52.2 × 42.4
  - Notes: `normal_` prefix again
- **`bust_base.stl`**: Bust base
  - Size mm (X × Y × Z): 70.4 × 56.6 × 58.8

There are no bust renders and no presupported bust files. The folder holds no head or hair, so the bust appears to take `head.stl`, `hair_pt1.stl` and `hair_pt2.stl` from the standard version files. Sized from the bounding boxes, the two bust files stack to something near 110 mm, and with the standard head and hair on top the assembled bust comes to roughly 140 mm.

## Print difficulty

**Standard: 3/5 (estimated).** The good news is that every part is presupported, the studio has hollowed the heavy pieces, and there is a Lychee scene ready to open. What lifts it above a 2 is plate fit and the slabs. Three presupported parts do not fit Mars-class as supplied: `base pt1.stl` (158.2 × 56.4 × 90.1 mm), `base pt2.stl` (147.8 × 58.6 × 95.2 mm) and `base pt7.stl` (128.8 × 90.7 × 142.3 mm). All three fit Saturn-class. The two base slabs, `base_pt1.stl` and `base_pt2.stl`, are each about 148 mm across and 25 mm thick, which is a large flat area whatever angle they are supported at, so I would expect to watch those for suction and to check the studio's drain holes before printing them. If you print the slabs flat and unhollowed, this edges toward a 4.

Thin parts: `hand_12.stl` is 110.8 mm long and 14.8 mm at its thickest, so the shotgun barrel is the piece most likely to bend or snap in the wash. The two hair parts are small and thin at the tips. The three plants have thin leaf edges, and the vines on the scenery parts are modelled in, so the presupports there matter. Everything else is chunky.

On a Mars-class plate, 20 of the 23 presupported parts fit; `base pt1.stl`, `base pt2.stl` and `base pt7.stl` need a Saturn-class plate or your own resupport at a different angle. On Saturn-class everything fits.

**Bust: 2/5 (estimated).** Two chunky parts that both fit Mars-class. There are no presupports, so you support and orient them yourself, and I would hollow the torso and add drain holes, though neither part is large enough to force it. If the head and hair come from the standard files, use their presupported copies.

## Assembly difficulty

**Standard: 4/5 (estimated).** 23 parts, of which 7 are base and scenery pieces that have to line up with each other before the figure goes on. That is the multi-piece base the anchors warn about, and the panel, truss and vine sections stack tall, so alignment errors at the bottom show at the top. The figure itself is 13 pieces: head, two hair parts, torso, two arms, two hands, two legs, two boots and the holster. The visible joins are at the neck, the shoulders, the wrists, the hips (the torso-to-leg joins sit under the belt and pouches, which helps), and the boot tops. The hair-to-head join is hidden under the fringe on this haircut.

Two things need care. The shotgun (`hand_12.stl`) is a long thin piece attached at the wrist and propped against the scenery at its stock, so it wants a pin at the wrist and probably a dab of glue where the stock meets the panel. The bent right leg crosses in front of the straight left leg and only the left boot carries the weight, so getting both boots flat on the grating is the alignment job that matters. I would pin the left leg (`leg_R.stl`) into the base. Whether the studio has keyed pegs and sockets at the joints is not visible in the renders.

**Bust: 2/5 (estimated).** Two bust files, and up to four pieces if the standard head and two hair parts go on top. The torso-to-base join and the neck join are the only seams, and the neck sits under the collar.

## Paint difficulty

**Standard: 4/5 (estimated).** The face is realistic, with freckles, and it is the focal point of every render, so it has to be done well; the skin area is small though, just the face and neck. The materials count is the real work: leather-grain grey bodysuit, black leather vest, black gloves and boots, grey belt with silver hardware, red and yellow shells with brass bases, gunmetal shotgun, red hair, and then the base with rusted steel, a hazard stripe pattern, moss, green vines, leaves and a green monitor screen. The hazard stripes are a freehand or masked pattern. Rust and moss weathering is where most of the hours will go. The monitor screen is the one glow element; painted flat it stays a 4, and if you want it to read as lit, with a bright centre and a spill of green on the panel around it, that is the 5 territory of the anchors.

**Bust: 3/5 (estimated).** Same face and hair, the vest, bandolier and belt, and no scenery. Realistic skin on a small area, two or three textures (leather, hair, metal hardware), and the shells as the small detail.

**Paint reference.** From the coloured renders: hair a saturated orange-red with lighter highlights. Skin a light warm tone with freckles across the nose and cheeks, brown eyes, natural lip colour. Bodysuit a mid grey with a fine leather grain, lighter grey across the upper chest, silver zip. Vest, harness straps, cap sleeves, gloves, pouches, thigh straps, holster, knee pads and boots all black, with the vest and boots slightly warmer and the knee pads and hardware showing silver rivets and buckles. Bandolier black with six shells alternating red and yellow, brass bases. Waist belt mid grey with a large silver buckle. Shotgun gunmetal black with a lighter worn edge on the pump. Base grating dark rusted steel, hazard stripe warm yellow and black, moss a yellow-green, lower ring and pipes a red-brown rust. Panels and truss dark grey steel with heavy rust and dirt; vines an olive green; leaves a dark green with lighter veins; monitor screen a bright pale green with a darker green bezel.

## Gallery

![Full front view of a red-haired woman in a grey bodysuit and black vest leaning on a shotgun on a wrecked metal base with vines.](https://storage.ghost.io/c/a3/a0/a3a0518d-0f21-4cef-92df-70ee9495a0e5/content/images/2026/11/3dmoonn-regina-1.jpg)

Front three-quarter view of the whole kit: Regina full length with the shotgun propped on the left panel, the green monitor panel and truss behind her on her left, and the octagonal hazard-stripe base on its rusted ring; the studio text reads "August reward available on my Patreon". This is the only render that shows the entire base stack and all the scenery in one frame.

![Side-angled view of the figure with the rusted truss and glowing green monitor beside her.](https://storage.ghost.io/c/a3/a0/a3a0518d-0f21-4cef-92df-70ee9495a0e5/content/images/2026/11/3dmoonn-regina-2.jpg)

Three-quarter view turned toward her left side, full length, with the truss and the green monitor panel in the foreground on the right and the shotgun along her right leg. It shows the depth of the scenery behind her and how the vines wrap the truss.

![Angled front view of the figure beside a torn metal panel wrapped in vines.](https://storage.ghost.io/c/a3/a0/a3a0518d-0f21-4cef-92df-70ee9495a0e5/content/images/2026/11/3dmoonn-regina-3.jpg)

Three-quarter view turned toward her right side, full length, the torn panel with vines filling the left of the frame and the shotgun stock resting on it, the monitor hidden behind her. It shows how the propped shotgun meets the panel and the leaves at the base.

![Back view of the figure showing the vest harness and the rusted panels and vines behind her.](https://storage.ghost.io/c/a3/a0/a3a0518d-0f21-4cef-92df-70ee9495a0e5/content/images/2026/11/3dmoonn-regina-4.jpg)

Rear view, full length: the harness straps crossing the back of the black vest, the short nape of the red bob, the shotgun barrel below her right elbow, and the backs of the truss, panel and vines. This is the only view of the vest back and the rear of the scenery.

![Side profile of the figure with her hand at her collar, standing on a hazard-striped base.](https://storage.ghost.io/c/a3/a0/a3a0518d-0f21-4cef-92df-70ee9495a0e5/content/images/2026/11/3dmoonn-regina-5.jpg)

Left side profile, full length: the raised hand at her chin, the shoulder strap and hip pouch in profile, the knee pad and the thigh straps, and the panel and truss behind her. It shows the lean of the pose and the thickness of the base stack from the side.

![Close-up of the figure's face, red hair and shotgun-shell bandolier.](https://storage.ghost.io/c/a3/a0/a3a0518d-0f21-4cef-92df-70ee9495a0e5/content/images/2026/11/3dmoonn-regina-6.jpg)

Close-up from the bust up: freckles, brown eyes and small smile, the layered red bob, the light grey chest panel and zip, the six red and yellow shotgun shells on the bandolier, the belt buckle, the fingerless gloves and the shotgun receiver under her right hand. This is the reference for the face and the upper-body hardware.

![Close-up of the rusted, hazard-striped base with boots, moss and a broken metal panel.](https://storage.ghost.io/c/a3/a0/a3a0518d-0f21-4cef-92df-70ee9495a0e5/content/images/2026/11/3dmoonn-regina-7.jpg)

Close-up of the base from the front: boots on the grating, the knee pad, the yellow-and-black hazard stripe, moss patches, the rusted lower ring with pipes and corner blocks, the broken panel with bent spikes on the left and the monitor above. This is the reference for base weathering and the grating texture.

## Links

- Want it printed? [Get the unpainted kit in the store](https://store.3dprintedgaragekits.com/products/video-game-red-haired-commando-shotgun-jungle-wall-resin-garage-kit?ref=3dprintedgaragekits.com).
- Studio Patreon: [3Dmoonn on Patreon](https://www.patreon.com/3Dmoonn?ref=3dprintedgaragekits.com)
- Studio store: [3Dmoonn on Gumroad](https://3dmoonn.gumroad.com/?ref=3dprintedgaragekits.com) · [Regina on Gumroad](https://3dmoonn.gumroad.com/l/Regina?ref=3dprintedgaragekits.com)
- CGTrader: [3Dmoonn on CGTrader](https://www.cgtrader.com/designers/3dmoonn?ref=3dprintedgaragekits.com) · [Regina on CGTrader](https://www.cgtrader.com/3d-print-models/art/sculpture/regina-dino-crisis?ref=3dprintedgaragekits.com)
- Cults3D: [3Dmoonn on Cults3D](https://cults3d.com/en/users/3Dmoonn/3d-models?ref=3dprintedgaragekits.com)
- Website: [3Dmoonn](https://www.3dmoonn.com/?ref=3dprintedgaragekits.com)