> ## Content Index
> Fetch the complete content index at: https://3dprintedgaragekits.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# Chibi Frieza by Chibi Station - Kit Overview
- URL: https://3dprintedgaragekits.com/chibi-station-frieza/
- Published: 2026-11-17T23:28:03.000Z
- Updated: 2026-11-17T23:28:03.000Z
- Description: Chibi Station's Frieza stands on a mossy rock with a red energy ball balanced on one raised fingertip and a dragon ball at his feet, ringed by green water splashes and round-topped trees. The kit comes as 24 raw parts, with the purple head dome as its own piece.
- Author: Rin Stout
- Tags: Chibi Station, Kit Overview, Anime, Dragon Ball, Chibi, 6–9 Inches, Advanced, #kit-import-2026-11-16, #open-items

Frieza from Dragon Ball, as a chibi by Chibi Station. He stands on a rock with one finger raised and a red energy ball balanced on the tip, a dragon ball at his feet and a ring of green water splashing up around him. What stands out in the files is how much of the kit is scenery: the rock, trees and water are 11 of the 24 parts.

This post is written from the studio's files and renders. I have not printed it yet.

## At a glance

- **Studio:** Chibi Station
- **Character and source:** Frieza, Dragon Ball
- **Section:** Anime
- **Versions and sizes (H × W × L):** One version, a split kit. Assembled roughly 160 × 115 × 90–100 mm (about 6.3 in tall), my estimate. Chibi Station doesn't include a dimension sheet with this kit, so every size in this post comes from the STL bounding boxes. The depth depends on how the two rock pieces go together. I haven't confirmed that `base1` and `base2` are front and back halves of one rock, not alternates.
- **Size note:** The studio doesn't give an assembled height for this kit. The height here, about 6 to 9 inches, is my estimate from the STL files.
- **Parts:** 24 (11 figure, 2 accessories, 11 base and scene).
- **Presupports:** None. Chibi Station ships raw STLs only for this kit. There are no presupported files and no slicer project files in the folder.
- **Largest part and plate fit:** `head.stl` at 96.9 × 53.9 × 40.5 mm, horns included. Every part fits a Mars-class plate.
- **Ratings (estimated):** Print 4/5, Assembly 4/5, Paint 4/5\. Skill level: advanced, by the highest rating.
- **Status:** files reviewed, not printed
- **Where to get the files:** from the studio, Chibi Station.

## The model

This is Frieza in his horned first form, in battle armor. He stands with his feet apart on top of a rock. His right arm is raised beside his head with the index finger pointing up, and a small red energy ball sits balanced on the fingertip, the other fingers curled in. His left hand rests on his hip with the elbow out. It's a relaxed, smug pose, like he's showing off a trick.

The head is about a third of the figure's height. It's a bone-white cranium covered in fine dark scratch marks, with two black horns that sweep out to the sides and a little upward, grooved near the base. A glossy purple dome fills the top of the head, magenta at its pink rim and shading to violet in the middle. Under a heavy V-shaped brow his face is pale lavender. The red eyes are narrowed, and a closed smirk in dark gray lips pushes his cheeks up. Salmon-pink ribbed panels, outlined in dark gray, frame each side of the face, with white plates at the jaw.

The costume, item by item. A purple chest plate with a raised center seam, dark scratch marks and light gray trim. A tan ribbed panel set in a gray arch over the stomach. Tan shoulder pads with long dark lines and gray edging; the one on his left shoulder sweeps out into a long point. A gray band at the waist, and charcoal shorts. Tan ribbed wrist guards with gray trim on both forearms. Tan shin guards with horizontal ribbing and gray cuffs top and bottom. His arms, legs and tail are salmon pink with dark segment lines all the way around. His neck, hands and feet are lavender, and the feet are three-toed claws with dark gray nails. A magenta gem with a white rim shows on his left upper arm, just under the shoulder pad. The tail comes around from behind his right leg, and its lavender tip reappears past his left elbow.

The base is a brown rock with cracked, faceted sides, topped with teal moss dotted with small dark blue star-shaped plants. A second strip of moss runs along a lower ledge at the front, on his right. Beside his right foot sits an orange dragon ball with four red stars, about the height of his shin guards. Five trees with round, lumpy teal crowns on thin tan stalks stand around the rock, two tall ones behind his left side. A ring of glossy emerald-green water splashes rises around the whole rock in wavy sheets with pointed tips, highest at the back on his right. The horns carry the figure's width: `head.stl` is 96.9 mm across, wider than either rock piece (69.1 and 72.7 mm). The water ring carries the footprint, roughly 115 mm across by my estimate. The only render is a front view; what it can't show is listed under the gallery.

## Versions and sizes

- **Split kit**
  - H × W × L (mm): roughly 160 × 115 × 90–100 assembled (my estimate)
  - Pieces: 24
  - Presupported (format): No, raw STL only

The report lists sizes as x × y × z. On these files y reads as the vertical axis: the trees and legs are tallest in y, and both rock pieces are 26.6 to 26.9 mm in y, which matches the rock's height in the render. So H is y, W is x and L is z. I got the height by stacking the rock, feet, legs, torso and head and checking that against the render, using the rock's 69–73 mm width as the ruler. If the two rock pieces sit front to back, the rock alone is about 88 mm deep (46.1 + 41.6), and the splashes reach a little past that.

This kit suits someone on a Mars-class printer who wants a full scene piece and is comfortable hollowing, supporting thin sheets and pinning. Every part fits a small plate. If you keep translucent resin around, the four water pieces and the dragon ball are already separate files. If you only want the figure, that's the 11 figure parts, but he'd need something else to stand on.

**About the sizes.** Every measurement in this post comes from the sculptor's files or the studio's published size information for the unprinted model. A printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

## What's in the download

Everything lives in one folder, `STL/`, 24 files. Sizes below are from the STL report. The meshes are dense: about 12.2 million triangles across the kit, with `head.stl` alone just over a million.

**Figure**

- **`head.stl`**: Head: bone-white cranium, both black horns, face with red eyes and smirk, salmon-pink cheek panels
  - Size mm (x × y × z): 96.9 × 53.9 × 40.5
  - Notes: Largest part; horns set the width and taper to points; solid, hollow it
- **`crystal_head.stl`**: The purple dome that fills the top of the head
  - Size mm (x × y × z): 31.0 × 34.4 × 39.8
  - Notes: Smooth, glossy surface; separate part for painting
- **`torso.stl`**: Armored torso: purple chest plate, tan shoulder pads, ribbed stomach panel
  - Size mm (x × y × z): 61.5 × 32.4 × 26.7
  - Notes: Shoulder pads set the 61.5 mm width
- **`legs.stl`**: Both legs in one piece, salmon pink and segmented
  - Size mm (x × y × z): 22.1 × 38.5 × 25.5
  - Notes: Likely splits from the torso at the gray waist trim
- **`arm1.stl`**: One arm with wrist guard and hand; by size, the left arm with the hand on the hip
  - Size mm (x × y × z): 22.7 × 27.8 × 22.0
  - Notes: Elbow out
- **`arm2.stl`**: One arm with wrist guard and hand; by size, the raised right arm with the pointing finger
  - Size mm (x × y × z): 23.1 × 33.4 × 29.8
  - Notes: The fingertip carries `power.stl`
- **`crystal1_arm.stl`**: Small gem for an upper arm
  - Size mm (x × y × z): 7.2 × 6.8 × 8.0
  - Notes: Tiny; I haven't confirmed that this and `crystal2_arm` are the upper-arm gems
- **`crystal2_arm.stl`**: The second upper-arm gem
  - Size mm (x × y × z): 6.4 × 7.7 × 6.2
  - Notes: Smallest part in the kit
- **`foot1.stl`**: One clawed foot with its tan shin guard
  - Size mm (x × y × z): 18.2 × 26.7 × 19.5
  - Notes: Weight-bearing
- **`foot2.stl`**: The other foot and shin guard
  - Size mm (x × y × z): 19.0 × 26.7 × 21.0
  - Notes: Weight-bearing
- **`tail.stl`**: Segmented tail with lavender tip, wraps around behind the legs
  - Size mm (x × y × z): 62.4 × 44.8 × 25.8
  - Notes: Large hanging piece; attachment not visible

Figure: 11 files.

**Accessories**

- **`power.stl`**: Red energy ball balanced on the raised fingertip
  - Size mm (x × y × z): 9.0 × 9.2 × 9.1
  - Notes: 817,403 triangles of crackle texture on a 9 mm ball; glues to a fingertip
- **`esfere_dragon.stl`**: Orange dragon ball with four red stars
  - Size mm (x × y × z): 18.4 × 18.4 × 18.4
  - Notes: Solid sphere; the studio's spelling of the file name

Accessories: 2 files.

**Base and scene**

- **`base1.stl`**: One of two rock pieces, moss on top
  - Size mm (x × y × z): 69.1 × 26.6 × 46.1
  - Notes: Heaviest part in the kit; solid, hollow it
- **`base2.stl`**: The other rock piece
  - Size mm (x × y × z): 72.7 × 26.9 × 41.6
  - Notes: Solid, hollow it
- **`tree1.stl`**: Tallest tree: round teal crown on a thin tan stalk
  - Size mm (x × y × z): 17.8 × 43.1 × 19.1
  - Notes: Thin stalk
- **`tree2.stl`**: Tree
  - Size mm (x × y × z): 9.2 × 24.0 × 9.5
  - Notes: Thin stalk
- **`tree3.stl`**: Smallest tree
  - Size mm (x × y × z): 7.7 × 23.1 × 8.0
  - Notes: Thinnest stalk
- **`tree4.stl`**: Second-tallest tree
  - Size mm (x × y × z): 13.4 × 32.5 × 13.9
  - Notes: Thin stalk
- **`tree5.stl`**: Tree
  - Size mm (x × y × z): 10.3 × 29.6 × 10.6
  - Notes: Thin stalk
- **`water1.stl`**: Green water splash
  - Size mm (x × y × z): 59.5 × 42.1 × 54.6
  - Notes: Heaviest splash; pointed tips
- **`water2.stl`**: Green water splash
  - Size mm (x × y × z): 56.8 × 54.1 × 60.3
  - Notes: Tallest scene piece; pointed tips
- **`water3.stl`**: Low green splash
  - Size mm (x × y × z): 55.9 × 18.6 × 37.2
  - Notes: Thin sheet
- **`water4.stl`**: Wide, low green splash
  - Size mm (x × y × z): 81.3 × 29.6 × 61.6
  - Notes: Widest part after the head; mostly thin sheet

Base and scene: 11 files. Which tree and which splash goes where around the rock isn't marked in the names.

Nothing in the folder is presupported. There are no helper blocks, no merged full statue and no slicer files. The studio numbers parts instead of naming them by side, so the arms, feet, trees and water pieces have to be matched to the render by size.

One build uses the whole folder, as long as `base1` and `base2` are two halves of one rock. If they turn out to be alternate bases, one build drops one rock piece.

## Print difficulty

**4/5 (estimated).**

Chibi Station ships this kit raw only, so you support every part yourself.

Plate fit isn't the problem. All 24 parts fit a Mars-class plate in the report, and the largest, `head.stl`, is 96.9 × 53.9 × 40.5 mm.

The rating comes from the thin parts. The four water pieces are wavy sheets with pointed tips, much like flames. `water4.stl` spreads across an 81.3 × 29.6 × 61.6 mm box but is mostly thin sheet. `water2.stl` is the tallest scene piece at 54.1 mm. The five trees are round crowns on thin stalks; the smallest, `tree3.stl`, is 7.7 × 23.1 × 8.0 mm. The horns taper to points at each end of the 96.9 mm head. The energy ball, `power.stl`, is 9 mm across with fine crackle detail, and the two arm gems are 6 to 8 mm and tiny.

Then there's the weight. The raw files are solid. The two rock pieces and the head are large parts, and `water1.stl` and `water2.stl` are the heavier splashes. I'd hollow the rock pieces and the head and add drain holes.

The dome, `crystal_head.stl`, is a smooth glossy surface at 31.0 × 34.4 × 39.8 mm. Layer lines show on a surface like that, so its orientation matters more than on the textured parts. For its size it is light, so it may be a thin cap with a cupped underside; if it is, angle it so the cup doesn't face the plate.

Why not a 5: no part comes close to exceeding a Saturn-class plate, and nothing has to be hollowed to print at all.

## Assembly difficulty

**4/5 (estimated).**

There are 24 parts, and 11 of them are the base and scene. The rock comes in two pieces of about the same size, and four water pieces and five trees go around it. That's a multi-piece base to line up, with no render of the back to check against.

Two joins carry weight. The head and dome together are a large solid mass sitting on a narrow neck. And the whole figure stands on two small feet, `foot1.stl` and `foot2.stl`. I'd pin the head to the torso and the feet into the rock.

The tail is a large hanging piece, 62.4 × 44.8 × 25.8 mm, that wraps around behind the legs. Where it attaches can't be seen in the render.

The torso and legs probably split at the gray waist trim, which would hide the seam. The dome meets the white cranium at a pink rim, a natural edge for that join.

Small parts: the 9 mm energy ball glues to the tip of one raised finger, a small contact point I'd pin or at least seat carefully. The two arm gems are 6 to 8 mm. By size, `arm2.stl` (33.4 mm tall) is the raised right arm and `arm1.stl` (27.8 mm) is the arm on the hip.

Why not a 5: it's under 30 parts.

## Paint difficulty

**4/5 (estimated).**

The face is a chibi cartoon face, not realistic skin, and on its own that would keep the rating lower. The rest pushes it up. I count more than a dozen materials: bone-white cranium, black horns, a glossy purple dome, lavender skin, salmon-pink segmented limbs and tail, purple armor, tan ribbed pads and guards, gray trim, charcoal shorts, magenta gems, the red energy ball, the orange dragon ball, brown rock, teal moss and tree crowns, tan stalks and green water.

Pattern and line work: dark segment lines around every limb and the tail, ribbing on the shoulder pads, stomach panel, wrist guards and shin guards, and scratch marks on the cranium and chest plate. Freehand: the four red stars on the dragon ball.

Effects: the dome is a smooth magenta-to-violet gradient with a high gloss. The energy ball glows, and in the render it throws red light onto the side of the cranium and the right shoulder pad. The water and the dragon ball are rendered translucent. You can paint those effects or print the parts in clear resin.

Why not a 5: the face is cartoon-flat, and the anchor for 5 starts from a realistic face and skin.

**Paint reference.** From the render, material by material. Cranium: off-white bone with fine dark scratches and a thin pink rim around the dome. Horns: glossy black-gray. Dome: glossy candy purple, magenta at the edges going to violet in the center. Face, neck, hands and feet: pale lavender, with red eyes and dark gray lips. Cheek panels: salmon pink with dark gray ribbing and outline; jaw plates white. Arms, legs and tail: salmon pink with dark red-brown segment lines; tail tip lavender. Chest plate: purple with dark scratches. Shoulder pads, stomach panel, wrist guards and shin guards: tan to ochre with dark lines. Trim and waist band: light gray. Shorts: charcoal. Arm gem: magenta with a white rim. Claws: dark gray. Energy ball: bright red-orange, glowing. Dragon ball: translucent orange with red stars. Rock: warm brown with darker cracks. Moss and tree crowns: teal, with small dark blue plants in the moss. Tree stalks: tan wood. Water: translucent emerald green.

## Gallery

![Chibi Frieza in purple and tan armor stands on a mossy brown rock with a red energy ball on one raised fingertip, an orange dragon ball at his feet, and green water splashes around him.](https://storage.ghost.io/c/a3/a0/a3a0518d-0f21-4cef-92df-70ee9495a0e5/content/images/2026/11/chibi-station-frieza-1.jpg)

The whole kit assembled, in full color, seen from the front and slightly above on a dark teal-to-gray gradient, framed from the horn tips down to the bottom of the water ring. Frieza holds the red energy ball on his raised right fingertip with his left hand on his hip; the orange dragon ball sits on the moss beside his right foot, five teal trees stand around him, and the green splashes circle the rock. The high angle shows the moss tops, the shine on the dome, and the red glow the energy ball throws on the cranium. What it shows that the others don't: it's the only render in the kit, so every color and detail in this post comes from it.

The render carries no logo badge or lettering, and the dark teal gradient behind the figure is backdrop, not part of the model.

Because this is the only view, some things can't be seen anywhere in the kit's images: the back of the figure and where the tail attaches, the back of the head and dome, the back half of the rock and the water ring behind it, the underside of the base, and any pegs or sockets. What I say about those comes from the file sizes, not from a picture.

## Links

- Want it printed? [Get the unpainted kit in the store](https://store.3dprintedgaragekits.com/products/anime-chibi-horned-alien-tyrant-energy-ball-water-splash-base-resin-garage-kit?ref=3dprintedgaragekits.com).
- Studio Patreon: [Chibi Station on Patreon](https://www.patreon.com/ChibiStation?ref=3dprintedgaragekits.com)
- Studio store: [Chibi Station on Gumroad](https://chibistation.gumroad.com/?ref=3dprintedgaragekits.com)
- Cults3D: [Chibi Station on Cults3D](https://cults3d.com/en/users/ChibiStation/3d-models?ref=3dprintedgaragekits.com)
- Thangs: [Chibi Station on Thangs](https://thangs.com/designer/ChibiStation?ref=3dprintedgaragekits.com)