> ## Content Index
> Fetch the complete content index at: https://3dprintedgaragekits.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# Yuki Tsukumo and Garuda by Lion Realm Studio - Kit Overview
- URL: https://3dprintedgaragekits.com/lion-realm-studio-yuki-tsukumo/
- Published: 2026-11-17T23:28:08.000Z
- Updated: 2026-11-17T23:28:08.000Z
- Description: An eight-part Yuki Tsukumo from Lion Realm, standing hand on hip with her cursed spirit Garuda coiled around her. The cursed spirit is one 190 × 241 × 129 mm piece, and the studio's own print plates run past Saturn-class too, so the print story here is cutting.
- Author: Rin Stout
- Tags: Lion Realm Studio, Kit Overview, Anime, Jujutsu Kaisen, Advanced, #kit-import-2026-11-16, #open-items

Yuki Tsukumo with her cursed spirit Garuda, from Jujutsu Kaisen, by Lion Realm Studio. What sets this kit apart is the cursed spirit: it is modeled as a single piece, 190.3 × 240.8 × 128.5 mm, that fits neither a Mars-class nor a Saturn-class plate in any flat orientation, and two of the studio's three presupported plates run over Saturn-class as well.

This post is written from the studio's files and renders. I have not printed it yet. Everything below is checkable against the download.

## At a glance

- **Studio:** Lion Realm (LionRealm Studio)
- **Character and source:** Yuki Tsukumo with Garuda, Jujutsu Kaisen
- **Section:** Anime
- **Versions and sizes:** Two folders. `Yuki Tsukumo - Jujutsu Kaisen/` is the raw figure in 8 parts; the studio states no assembled height and there is no `Scale.png` in this kit, so all sizes here are STL bounding boxes (X × Y × Z as the report lists them). The tallest raw part is `curse.stl` at 190.3 × 240.8 × 128.5 mm and the base footprint is 142.1 × 183.9 mm. `Yuki Tsukumo - Pre-supported/` is 3 whole print plates, the largest 193.2 × 126.6 × 238.1 mm.
- **Parts per version:** raw 8; presupported 3 plates.
- **Presupports:** the presupported folder only, as three plate STLs with supports modeled in, plus a Lychee scene in `Lychee Scene/`.
- **Largest part and plate fit:** raw `curse.stl` fits neither Mars-class nor Saturn-class; `base.stl` and `legs.stl` miss Mars-class and fit Saturn-class; `chest.stl`, `hair.stl`, `head.stl`, `left_arm.stl`, `right_arm.stl` fit Mars-class. Presupported `yuki part 1.stl` and `yuki part 2.stl` fit neither class; `yuki part 3.stl` fits Saturn-class only.
- **Ratings (estimated):** Print 5/5 · Assembly 3/5 · Paint 4/5\. Skill tag: advanced.
- **Status:** files reviewed, not printed.
- **Where to get the files:** Lion Realm's Patreon and Gumroad, links at the bottom.

## The model

Yuki stands square to the viewer with her feet planted wide, her left hand on her hip and her right arm hanging loose at her side. It is a standing pose with no action in it. The action is all in the cursed spirit. Garuda comes up from behind her right hip, loops around her back, and rears its head over her right shoulder so the two long prongs on its skull stand higher than her head. Its forked tail sweeps out to the left of the base at about knee height. In the front renders the tail and the head frame her; from the back the whole coil is visible across her legs and spine.

Garuda itself is a long segmented body, rendered in flat gray with darker gray metallic rings between the segments. The head is a smooth pale bulb with one dark purple eye set in the side, a ribbed neck collar, and two straight bars rising from the crown like a tuning fork. Along the body are flat diamond-shaped fins that the studio renders as pale translucent blue, like frosted glass. The tail ends in a two-pronged fork. It reads as part machine, part eel.

Her costume is short on materials and long on skin. The top is a black sleeveless mock-neck crop top with a single thin yellow diagonal line running from the collar button down across the chest, and a small round button at the throat. The trousers are dark indigo blue, loose, gathered at the ankle, with a flap cargo pocket and zipper pull on each thigh and a single button at the waistband. The boots are black lace-ups with the laces modeled. Her midriff, arms, and shoulders are bare. Her hair is straight blonde, parted in the center, falling past her shoulder blades and swept out to her left as if in a breeze; the ends are cut in a straight line. The face is calm, a slight closed-mouth smile, pale skin, light brown eyes, and a pink lip.

The base is a square slab of dark cracked asphalt with a dashed white center line running front to back and rust-red broken edges. It is a plain road surface. The silhouette is a tall standing figure with the cursed spirit adding width on both sides and height above the head. The base footprint is 142.1 × 183.9 mm; the cursed spirit's 190.3 mm span is what carries the width of the whole thing past the base edge.

## Versions and sizes

- **Raw figure (`Yuki Tsukumo - Jujutsu Kaisen/`)**
  - H × W × L (mm): No assembled height stated. Tallest part `curse.stl` 240.8 tall; base 142.1 × 183.9 footprint, 28.5 thick. Sizes from STL bounding boxes.
  - Pieces: 8
  - Presupported (format): No
- **Presupported plates (`Yuki Tsukumo - Pre-supported/`)**
  - H × W × L (mm): Largest plate `yuki part 2.stl` 238.1 tall × 193.2 × 126.6
  - Pieces: 3 plates
  - Presupported (format): Yes (STL plates with supports modeled in, plus `.lys` scene)

The presupported plates suit anyone with a large-format printer who wants to load the studio's files and go. Two of the three plates exceed Saturn-class, so on a Saturn-class printer they are not a shortcut. The raw folder suits anyone who wants to hollow the base and legs their own way and who is prepared to cut `curse.stl` into pieces that fit their plate. There is no bust.

**About the sizes.** Every measurement in this post comes from the sculptor's files or the studio's published size information for the unprinted model. A printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

## What's in the download

### Raw figure — `Yuki Tsukumo - Jujutsu Kaisen/` (8 STLs)

**Figure**

- **`head.stl`**: Head with the bulk of the hair
  - Size mm (X × Y × Z): 80.3 × 87.7 × 66.8
  - Notes: 1.96 million triangles, the densest mesh in the kit. Fits Mars-class.
- **`hair.stl`**: Small separate hair piece
  - Size mm (X × Y × Z): 27.5 × 28.9 × 14.2
  - Notes: Tiny. I can't tell from the files which lock of hair this is or where it keys onto `head.stl`.
- **`chest.stl`**: Torso, crop top, and upper body to the waist
  - Size mm (X × Y × Z): 53.1 × 95.5 × 51.8
  - Notes: Fits Mars-class.
- **`legs.stl`**: Trousers, boots, and legs from the waist down
  - Size mm (X × Y × Z): 89.6 × 188.5 × 49.9
  - Notes: 188.5 mm tall, misses Mars-class on that axis, fits Saturn-class.
- **`left_arm.stl`**: Her left arm, bent, hand on hip
  - Size mm (X × Y × Z): 45.6 × 69.4 × 39.7
  - Notes: Fits Mars-class.
- **`right_arm.stl`**: Her right arm, hanging straight
  - Size mm (X × Y × Z): 36.2 × 110.2 × 23.4
  - Notes: Long and thin, 23.4 mm at its thickest. Fits Mars-class.

**Companion**

- **`curse.stl`**: Garuda, the whole cursed spirit as one piece
  - Size mm (X × Y × Z): 190.3 × 240.8 × 128.5
  - Notes: Fits neither Mars-class nor Saturn-class in any flat orientation. It is a long thin coil spread across that envelope, with thin fins and two thin prongs. Must be cut for anything under large-format.

**Base and scene**

- **`base.stl`**: Cracked asphalt square with road line
  - Size mm (X × Y × Z): 142.1 × 28.5 × 183.9
  - Notes: Large and solid. Misses Mars-class on the 183.9 mm axis, fits Saturn-class. Needs hollowing and drain holes if you print it raw.

No cloth, accessory, or alternate parts. Nothing is presupported in this folder. All 8 files computed with 0 NaN triangles.

### Presupported plates — `Yuki Tsukumo - Pre-supported/` (3 STLs)

- **`yuki part 1.stl`**: Print plate 1, parts unknown
  - Size mm (X × Y × Z): 217.7 × 123.2 × 190.3
  - Notes: Fits neither class. Misses Saturn-class by 0.2 mm on the 123.2 axis. 5.2 million triangles.
- **`yuki part 2.stl`**: Print plate 2, parts unknown
  - Size mm (X × Y × Z): 193.2 × 126.6 × 238.1
  - Notes: Fits neither class. Misses Saturn-class by 3.6 mm on the 126.6 axis. Light for its size, so this is likely where the cursed spirit sits.
- **`yuki part 3.stl`**: Print plate 3, parts unknown
  - Size mm (X × Y × Z): 151.5 × 123.0 × 177.5
  - Notes: Misses Mars-class, fits Saturn-class.

I haven't opened the Lychee scene, so I can't say which parts each plate holds or which printer the plates were laid out for.

These three files are whole plates, not the same-named part files that Lion Realm usually supplies in a `Pre-Support/` folder. There is no `BUST/` folder in this kit either. The `Lychee Scene/` folder holds one `.lys` scene and two `.lyt` autosaves; the autosaves are Lychee's own backups and not a third version. The studio's `Important.txt` says the presupported files are the personal files they use to print their own models, that you should use your printer's settings before printing to avoid failures, and that you are free to make your own supports in the slicer of your choice. The three plates, supports included, come out lighter than the raw base alone, so the studio hollowed the base and probably the legs and torso in these plates. All 3 files computed with 0 NaN triangles.

## Print difficulty

**5/5 (estimated)** for anyone printing on a Saturn-class plate or smaller. The number is driven by one part.

`curse.stl` is 190.3 × 240.8 × 128.5 mm. Saturn-class is 219 × 123 × 250, so the cursed spirit's smallest dimension, 128.5 mm, is already 5.5 mm wider than the plate's shortest axis, and there is no flat orientation that fits. It has to be cut. Because it is a coil with a bulb head, two prongs, thin fins, and a forked tail, spread thin across that whole envelope, the cuts land on thin sections and the pieces are fragile on the plate. The studio's presupports do not solve this for a Saturn-class owner: `yuki part 1.stl` at 217.7 × 123.2 × 190.3 and `yuki part 2.stl` at 193.2 × 126.6 × 238.1 both run over Saturn-class, by 0.2 mm and 3.6 mm on their tight axes. Plate 1 is close enough that a slicer might squeeze it with a small rotation, but that is something to test in Lychee, not something I can promise from the report.

If you own a large-format printer that swallows a 218 × 127 × 239 mm plate, this drops to a 2/5: three presupported plates, the studio's own hollowing, and nothing else to think about.

On the raw side, `base.stl` is a 142.1 × 183.9 mm flat solid slab. Printed flat it is a large suction surface; tilted it fits Saturn-class but needs hollowing and drain holes since the raw file has neither. `legs.stl` at 188.5 mm tall misses Mars-class and prints as one piece; it is the second thing to hollow. `right_arm.stl` is 110.2 mm long and 23.4 mm at its thickest, a freestanding thin part. `hair.stl` is tiny, small enough to lose in the wash. The head, chest, and both arms fit Mars-class, so a Mars-class owner can print the figure itself and only needs another plan for the base, legs, and cursed spirit.

## Assembly difficulty

**3/5 (estimated).** Eight raw parts is under the 10-piece line, but the joins are not all hidden and one piece hangs.

The arm joins are the problem. The top is sleeveless, so both shoulders are bare skin and both arm seams sit on a smooth visible surface. `left_arm.stl` also has to land with the hand against the hip, which gives you a second contact point to align. The torso-to-legs join is at the waistband and should hide under the trousers' edge. The head-to-chest join is at the mock-neck collar and should hide there too. `hair.stl` is a 27.5 × 28.9 × 14.2 mm piece that keys somewhere on the head; small enough to need tweezers.

Garuda is the large hanging piece. `curse.stl` is 240.8 mm on its long axis, and from the renders it touches the figure at her right hip and back and then stands up over her shoulder with the head and prongs cantilevered above her. Whether it also touches the base, and where the studio put the peg, I cannot tell from the renders. Once you have cut the cursed spirit into plate-sized pieces, you add those seams on top, and a coil of that length wants pins at every cut. The base is a single piece with no alignment to do.

## Paint difficulty

**4/5 (estimated).** The figure is mostly skin, and the face is realistic.

Skin covers the face, neck, both arms and shoulders, and the whole midriff, so smooth skin blending is most of the work. The face is a realistic sculpt with a slight smile, brown eyes, and pink lips, at a scale where the eyes are small. The hair is long straight blonde with the strands modeled, so it takes a base, a wash, and a highlight pass along a lot of strand length. After that the materials are simple: black top, one thin yellow line, dark indigo trousers, black boots. There is no pattern on the clothes.

Garuda adds the rest of the count. The body is two grays, one flat and one metallic for the segment rings and neck ribbing, plus a dark purple eye. The fins are what push this toward a five if you chase them: the studio renders them as pale translucent blue glass, and getting a convincing glass look on flat diamond fins means either clear resin for those pieces or a painted translucent effect. Painted opaque pale blue they are a four. The base is dark asphalt with cracks, a rust-red broken edge, and a dashed white road line, which is a wash and a drybrush.

**Paint reference.** From the colored renders: skin a pale warm tone; hair straight blonde, slightly darker toward the ends; eyes light brown; lips a muted pink; top matte black with a thin yellow diagonal line and a small dark button; trousers dark indigo blue with matching pocket flaps and small dark zipper pulls; boots black with black laces; Garuda body light flat gray, segment rings and neck collar darker metallic gray, eye dark purple, prongs and tail fork flat gray, fins pale translucent blue; base near-black asphalt with lighter gray cracks, white dashed center line, rust-red edges.

## Gallery

![Painted Yuki Tsukumo figure standing on a cracked asphalt base with a gray cursed spirit coiled around her, a drink can beside it for scale.](https://storage.ghost.io/c/a3/a0/a3a0518d-0f21-4cef-92df-70ee9495a0e5/content/images/2026/11/lion-realm-studio-yuki-tsukumo-01_1.jpg)

Full figure from the front, painted, on a wood table against a blurred shelf of boxed figures. A purple drink can stands beside the base as a size reference, with no dimension printed on it. Garuda's head and prongs rise at her right shoulder, the tail fork points left at knee height, and the fins along the coil show behind her left hip. This is the only render with the can in it.

![Three-quarter view of the painted Yuki Tsukumo figure with the cursed spirit's forked tail reaching out past the base.](https://storage.ghost.io/c/a3/a0/a3a0518d-0f21-4cef-92df-70ee9495a0e5/content/images/2026/11/lion-realm-studio-yuki-tsukumo-02_2.jpg)

Full figure from her right, three-quarter, painted. The head is turned slightly toward the camera and the tail fork extends toward the viewer at the front left. The hanging right arm is in full view. This is the angle that shows the tail's length past the base edge.

![Painted Yuki Tsukumo figure seen from her left with translucent blue fins visible on the cursed spirit behind her.](https://storage.ghost.io/c/a3/a0/a3a0518d-0f21-4cef-92df-70ee9495a0e5/content/images/2026/11/lion-realm-studio-yuki-tsukumo-03_3.jpg)

Full figure, painted, from slightly to her left. Both fins on the coil behind her are visible, and the yellow line on the top reads clearly. This is the cleanest view of the fins in profile.

![Back view of the painted Yuki Tsukumo figure showing the cursed spirit's segmented coil from tail to head.](https://storage.ghost.io/c/a3/a0/a3a0518d-0f21-4cef-92df-70ee9495a0e5/content/images/2026/11/lion-realm-studio-yuki-tsukumo-04_4.jpg)

Full figure from directly behind, painted. The whole coil of Garuda is laid out across her back and legs, from the tail fork at lower right up over her right shoulder to the head, with every segment ring and fin visible. Her hair falls straight down her back. This is the only render that shows the full path of the cursed spirit.

![Front view of the painted Yuki Tsukumo figure on a cracked asphalt base with the cursed spirit's head raised over her shoulder.](https://storage.ghost.io/c/a3/a0/a3a0518d-0f21-4cef-92df-70ee9495a0e5/content/images/2026/11/lion-realm-studio-yuki-tsukumo-05_5.jpg)

Full figure from the front, painted, framed tighter than `01_1.png` with a blue-gray wall behind the shelves and no can. Garuda's head is at upper left and one fin shows at her left hip. Best front view of the boots and the base's cracks.

![Close-up of the painted Yuki Tsukumo figure's face and crop top with the cursed spirit's head at her shoulder.](https://storage.ghost.io/c/a3/a0/a3a0518d-0f21-4cef-92df-70ee9495a0e5/content/images/2026/11/lion-realm-studio-yuki-tsukumo-06_6.jpg)

Close-up from the chest up, painted. The face, the center-parted hair, the collar button, and the yellow line are in sharp focus, with Garuda's bulb head and purple eye at left. This is the face reference.

![Unpainted gray render of the Yuki Tsukumo figure and cursed spirit showing sculpted detail.](https://storage.ghost.io/c/a3/a0/a3a0518d-0f21-4cef-92df-70ee9495a0e5/content/images/2026/11/lion-realm-studio-yuki-tsukumo-07_7.jpg)

Full figure from the front in unpainted gray, lit purple from the left. Same pose and framing as `05_5.png`. This is the only render that shows the sculpt without color, so the strand detail in the hair, the pocket flaps, and the base cracks read as geometry.

![Square crop of the painted Yuki Tsukumo close-up with the cursed spirit's head at her shoulder.](https://storage.ghost.io/c/a3/a0/a3a0518d-0f21-4cef-92df-70ee9495a0e5/content/images/2026/11/lion-realm-studio-yuki-tsukumo-square.jpg)

Square social crop of the chest-up close-up, painted, same view as `06_6.png` with more of the hair to the right in frame. Nothing new beyond the crop.

## Links

- Want it printed? [Get the unpainted kit in the store](https://store.3dprintedgaragekits.com/products/anime-blonde-crop-top-woman-segmented-serpent-spirit-asphalt-road-base-resin-garage-kit?ref=3dprintedgaragekits.com).
- Studio Patreon: [Lion Realm on Patreon](https://www.patreon.com/LionRealmStudio?ref=3dprintedgaragekits.com)
- Studio store: [Lion Realm on Gumroad](https://lionrealmstudio.gumroad.com/?ref=3dprintedgaragekits.com) · [Yuki Tsukumo and Garuda on Gumroad](https://lionrealmstudio.gumroad.com/l/gckdvo?ref=3dprintedgaragekits.com)
- CGtrader: [Lion Realm's designer page](https://www.cgtrader.com/designers/thiagocalixto3d?ref=3dprintedgaragekits.com) · [Yuki Tsukumo and Garuda on CGTrader](https://www.cgtrader.com/3d-print-models/art/sculpture/yuki-tsukumo-jujutsu-kaisen?ref=3dprintedgaragekits.com)
- Cults3D: [Lion Realm's models](https://cults3d.com/en/users/lionrealmstudio/3d-models?ref=3dprintedgaragekits.com) · [Yuki Tsukumo and Garuda on Cults3D](https://cults3d.com/en/3d-model/art/yuki-tsukumo-jujutsu-kaisen?ref=3dprintedgaragekits.com)
- Instagram: [@lionrealm.studio](https://www.instagram.com/lionrealm.studio?ref=3dprintedgaragekits.com)
- Discord: [Lion Realm's server](https://discord.gg/zeNzZdsx87?ref=3dprintedgaragekits.com)