Trish by 3Dmoonn - Kit Overview

3Dmoonn's Trish from Devil May Cry: a 16-part fan art kit with the Sparda sword slung behind her, a gothic stained-glass arch on the base, and one base half that is 292 mm long.

Share
Front view of a blonde figure in a black corset and leather trousers standing on a round stone base with a curved demon sword behind her.

Trish, from Devil May Cry, by 3Dmoonn. One figure, one base, and a curved demon sword that the studio ships both as a single piece and split in two. The base is the thing to plan around: one half of it is 292 mm long and does not lie flat on a Saturn-class plate.

At a glance

  • Studio: 3Dmoonn. The folder is named 3DMOONN Trish slc, typo included.
  • Character and source: Trish, Devil May Cry (video game).
  • Section: Fan art. Newsletter: Fan art.
  • Versions and sizes: one version. The studio gives no dimensions anywhere, so this is from the STL bounding boxes: roughly 300 mm to the top of the hair for the figure, standing on a base about 66 mm tall, with the stained-glass arch behind her rising 159 mm above it. Footprint from the two base halves: base_p1.stl is 292 × 126 mm and base_p2.stl 179 × 100 mm. I haven't confirmed how the two halves join, so I don't have the assembled footprint.
  • Size note: The studio doesn't give an assembled height for this kit. The height here, about 12 to 15 inches, is my estimate from the STL files.
  • Parts: 16 in my build (the split sword; sword_full.stl is an alternate and left out). 17 raw files in the kit root.
  • Presupports: yes, for all 16 build parts, in pre-support/ as STLs plus one Lychee scene, pre-support/pre-support.lys.
  • Largest part and plate fit: base_p1.stl at 292.1 × 65.8 × 126.0 mm. It misses Saturn-class (219 × 123 × 250 mm) in every flat orientation; 292 mm is longer than the plate's tallest axis. The presupported base pt1.stl (283.7 × 104.3 × 144.3 mm) misses too. Three raw parts miss Mars-class.
  • Ratings (estimated): Print 4/5, Assembly 4/5, Paint 5/5. Skill tag: advanced.
  • Status: files reviewed, not printed. Everything here is from the studio's files and renders, not from a print.
  • Where to get the files: 3Dmoonn's Patreon and Gumroad store, linked at the bottom. The first render's text reads "May reward available on my Patreon".

The model

Trish stands with her weight on one leg, hips cocked, her right hand resting on her hip and her left arm bent up behind her head. In the rear and side renders that raised hand is holding a black pistol; from the front it disappears behind her hair. Her chin is up and her eyes look just off to the viewer's right. It is a resting pose, not an action one, and the Sparda sword leaning behind her supplies all the motion the pose does not.

The identifying details are the ones you would expect for this character: long straight blonde hair swept back off a high forehead and blown out to her left in long separate strands, a black leather choker, and a strapless black corset top. The corset has a front zip over a pale tan panel and both side panels carry a raised scrollwork pattern in light tan. Below a bare midriff she wears two black leather belts slung at the hips, each with a silver double-prong buckle, and black leather trousers with the same tan scrollwork worked into the right hip and thigh. The boots are black leather, knee high, with a stacked heel and a side zip. On her right wrist is a wide black cuff closed with three small silver buckles. Her nails are painted black.

The face is realistic rather than stylised. Pale skin, grey-blue eyes with dark lashes, defined brows, a small closed-mouth smile with a soft pink lip. Render 6 is the reference for it: the hair strands are modelled as thick separate ribbons rather than a single mass, and the corset pattern is raised enough to read as embroidery under paint.

The sword is the second subject of the kit. It is a long curved blade in dark grey steel, tip resting on the base at front left, grip rising above her right shoulder. Along the back edge runs a length of red demonic flesh with rows of small bone-white teeth. Where blade meets grip there is an ornate guard in dark metal with gold edging, a large red gem, and two smaller green gems visible from behind. The grip is long and wrapped, with a knobbed pommel.

The base is a round two-tier stone drum in warm grey-brown stone with marble veining. A band of runes runs around the lower step and glows orange in the renders; a small gold cross sits on that band at the right rear. Two bearded stone faces with glowing eyes sit at the front corners. A ring of balusters runs around the platform edge, broken in places, and a broken column stump stands at the left. Behind her is a gothic arch, vitral.stl, which is Portuguese for stained glass, with a round rose window over two lancet panels in amber and brown glass, flanked by a rubble stone wall. She stands on a glowing orange circle set into the floor. The silhouette is tall and asymmetric: hair out to her left, sword tip down to the left and grip up to the right, arch and pillars filling in behind. The base and arch carry the footprint; the figure herself is slim.

Versions and sizes

  • Standard (only version)
    • H × W × L (mm, from bounding boxes): roughly 300 (figure) + 66 (base) tall; arch 159 above the base; base halves 292 × 126 and 179 × 100
    • Pieces: 16 (17 files; sword_full.stl is an alternate)
    • Presupported: Yes, all 16 build parts as STL, plus pre-support/pre-support.lys

There is one version and no scale is stated. It suits someone who wants a full diorama piece at roughly 1:6 proportions and has a printer bigger than Saturn-class, or is prepared to tilt or cut the long base half. It is not a kit for a Mars-class printer without cutting: three raw parts miss that plate.

About the sizes. Every measurement in this post comes from the sculptor's files or the studio's published size information for the unprinted model. A printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

What's in the download

Raw STLs sit in the kit root; presupported STLs in pre-support/. Sizes below are from the raw files.

Standard — 16 build parts plus one alternate

Figure

  • body.stl: Torso with corset, belts and (I think) the raised upper arm
    • Size mm: 74.2 × 95.1 × 56.9
    • Notes: Hollowed in the presupported file
  • legs.stl: Hips and legs in the trousers, to the boot tops
    • Size mm: 93.6 × 136.0 × 43.9
    • Notes: Largest figure part; hollowed when supported
  • head.stl: Head with face and the swept-back crown of hair
    • Size mm: 24.9 × 41.9 × 28.8
    • Notes: Supported file is lighter, so hollowed
  • hair_back.stl: The long flowing hair mass
    • Size mm: 104.5 × 124.3 × 57.8
    • Notes: Wide, many thin strand tips; not hollowed
  • hair_front.stl: Small front hair piece
    • Size mm: 24.3 × 31.1 × 13.1
    • Notes: Tiny and thin; easy to lose or snap
  • arm_L.stl: Left arm piece
    • Size mm: 17.3 × 28.5 × 45.8
    • Notes: Small. I can't tell from the files whether this is the raised arm or which file holds the pistol.
  • arm_R.stl: Right arm, hand on hip, with the buckled cuff
    • Size mm: 45.7 × 21.9 × 61.3
    • Notes: Thin at the wrist
  • boot_L.stl: Left boot
    • Size mm: 26.7 × 97.1 × 32.4
    • Notes: Heel is a small contact point
  • boot_R.stl: Right boot
    • Size mm: 40.7 × 102.5 × 31.7
    • Notes: Same

Base and scene

  • base_p1.stl: Base, part 1 (the long half)
    • Size mm: 292.1 × 65.8 × 126.0
    • Notes: Misses Mars and Saturn-class; hollowed when supported
  • base_p2.stl: Base, part 2
    • Size mm: 179.1 × 66.5 × 100.2
    • Notes: Misses Mars-class; hollowed when supported
  • vitral.stl: Stained-glass arch and rubble wall ("vitral" = stained glass)
    • Size mm: 138.7 × 158.6 × 57.4
    • Notes: Tracery is thin; hollowed when supported
  • Pilar_L.stl: Left pillar / column section ("pilar" = pillar)
    • Size mm: 50.9 × 53.1 × 116.0
    • Notes: Capital P in this one file only
  • pilar_R.stl: Right pillar / column section
    • Size mm: 25.5 × 49.8 × 88.7
    • Notes: Smaller than the left

Accessories

  • sword_pt1.stl: Sparda sword, part 1
    • Size mm: 80.9 × 132.4 × 50.1
    • Notes: Split blade; join on a visible surface
  • sword_pt2.stl: Sparda sword, part 2
    • Size mm: 117.3 × 103.4 × 54.1
    • Notes: Same

Alternates

  • sword_full.stl: The whole sword in one piece
    • Size mm: 164.7 × 210.8 × 86.4
    • Notes: Alternate. Misses Mars-class, fits Saturn-class. Not in the 16-part build

The build is 16 parts; the 17th file is the alternate sword_full.stl.

What's presupported. All 16 build parts have a presupported STL in pre-support/: arm L.stl, arm R.stl, base pt1.stl, base pt2.stl, body.stl, boot L.stl, boot R.stl, hair back.stl, hair front.stl, head.stl, legs.stl, pilar L.stl, pilar R.stl, sword pt1.stl, sword pt2.stl, vitral.stl, and the one Lychee scene pre-support.lys holds the whole set. There is no presupported sword_full.

Anything odd in the folder. Raw names use underscores (base_p1.stl, hair_back.stl) and the presupported names use spaces (base pt1.stl, hair back.stl); the base parts also change from _p1 to pt1. Pilar_L.stl has a capital P while pilar_R.stl and both presupported pillars are lowercase, so it sorts apart from its partner on a case-sensitive listing. The sword is supplied both whole and split; I am building from the split pair. There is no Visit my Patreon.url shortcut in this kit, which 3Dmoonn usually includes. The presupported folder has 544 degenerate triangles, 320 in base pt1.stl and 224 in body.stl; the raw files read cleanly.

4/5 (estimated).

The anchor for this rating is base_p1.stl. At 292.1 × 65.8 × 126.0 mm it is longer than any axis of a Saturn-class plate, so it cannot print flat there; it would need a steep tilt, which puts a large stone surface on heavy supports, or a cut. The studio's own presupported base pt1.stl comes in at 283.7 × 104.3 × 144.3 mm and still misses, so the supplied orientation assumes a bigger printer. base_p2.stl at 179.1 mm and sword_full.stl at 210.8 mm miss Mars-class but fit Saturn-class. Nothing in this kit fits a Mars-class plate without cutting except the figure and small scene parts.

The rest is what pulls it back from a 5. Every build part is presupported, and the studio has hollowed the heavy ones: base_p1.stl, base_p2.stl, legs.stl, body.stl and vitral.stl. Those shells will hold trapped resin, so check the studio's drain holes before printing.

Thin work to watch: the strand tips on hair_back.stl, which fan out over 104 mm of width; hair_front.stl, which is tiny; the tracery in vitral.stl; the teeth along the sword blade; the balusters ringing the base. The blade is a long thin plane, which is why I would print sword_pt1.stl and sword_pt2.stl rather than sword_full.stl.

Assembly difficulty

4/5 (estimated).

Sixteen parts, and the base alone is five of them: two halves, the arch, and two pillars, all of which have to line up with each other and with the figure's footprint. That is the multi-piece base the anchor for a 4 describes. The renders don't show the undersides, so I can't tell whether the base halves and pillars have keyed pegs and sockets.

On the figure, the joins that matter are the neck, the waist, the shoulders, and the boot tops. The waist join sits at the belt line and the boot joins under the boot cuffs, so both have somewhere to hide. The shoulder joins are on bare skin, and the raised arm is a long lever behind the head, so that one wants a pin. hair_back.stl is a wide piece hanging off the back of the head with its weight out to one side; I would pin it rather than trust glue alone. hair_front.stl is small enough to need tweezers.

The join between sword_pt1.stl and sword_pt2.stl lands on the blade, a smooth visible surface, with the grip end in the air, so the split needs a pin and some filling. Which arm file holds the pistol, and how it meets the body, I could not settle from the renders.

Paint difficulty

5/5 (estimated).

Realistic skin across the face, shoulders, arms, and midriff, with a detailed face that render 6 shows at close range. Then the materials: black leather in three finishes (corset, trousers, boots), the raised scrollwork on the corset and trousers, silver buckles and zips, blonde hair in separate strands, black nails, a dark steel blade, a length of red organic flesh with white teeth, gold on the guard, red and green gems, veined stone, glowing orange runes and floor, and amber stained glass that reads as translucent. The runes, gems, glass, and the glowing eyes on the stone faces are the glow and translucent effects that push it to a 5. The scrollwork is the freehand element; it is modelled in relief, so it can be dry-brushed rather than painted from nothing, which helps.

Paint reference (from the studio's renders). Skin: pale, warm, slight sheen. Hair: golden blonde with darker shadow between strands. Eyes: grey-blue. Lips: soft pink. Choker, corset, belts, cuff: black leather; corset side panels and trouser hip carry light tan scrollwork; the corset front panel behind the zip is pale tan. Buckles, zips, cuff buckles: silver. Trousers: black leather with a matte finish. Boots: black leather, slightly glossier. Nails: black. Sword blade: dark grey steel, edge lighter. Sword back: dark red flesh with bone-white teeth and ribs. Guard: dark metal with gold edging, a red gem at the centre and green gems at the back. Grip: dark wrapped leather, dark metal pommel. Base stone: warm grey-brown with darker marbling; band of runes glowing orange; floor circle glowing orange; gold cross at the rear; stone faces with glowing pale eyes. Arch: same stone; glass in amber, brown, and dull red; the rear rubble wall is plain grey stone.

Front view of a blonde figure in a black corset and leather trousers standing on a round stone base with a curved demon sword behind her.
Front view of the full figure and base, the studio logo and "May reward available on my Patreon" text at top right, and the "patreon.com/3Dmoonn" and "3dmoonn.gumroad.com/" strip along the bottom. She stands centred on the glowing floor circle, right hand on hip, left arm behind her head, hair blown out to the left, sword tip on the base at front left. Both stone faces, the balusters, the rune band, and the arch are all in frame. The only render that shows the whole base from the front.
Three-quarter view of the figure from her left with the stained-glass arch and broken column behind her.
Three-quarter view from her left, logo at top left. Shows the broken column stump and balustrade on the left of the base, the gold-edged sword guard with its red gem, the corset side zip, and the stone face at front right. The best view of how the arch sits behind her shoulder.
Rear view showing the back of the stained-glass arch, the demon sword's gem-set guard, and the raised hand holding a pistol.
Rear view. The arch fills the lower frame: rose window, two lancet panels in amber glass, the rubble wall at left, a gold cross on the rune band. Above it, the back of the sword with the red and green gems, the demonic guard, the flesh-and-teeth section, and her raised hand holding a black pistol. The only render of the glass panels, the sword's back, and the pistol.
Right side profile of the figure with the base balustrade and a bearded stone face in front.
Side profile from her right. Shows the S-curve of the pose, the trouser scrollwork on the right hip, the wrist cuff, the boot heel and side zip, the balustrade ring, and the stone face at front centre. The sword's flesh section is edge-on behind her.
Low-angle close-up of the corset, belts, and the toothed edge of the sword.
Low three-quarter close-up of the upper body and sword. The corset scrollwork, the double belts and buckles, the buckled cuff, black nails, and the teeth along the sword blade are all sharp here.
Close portrait of a blonde woman with grey-blue eyes, a black choker, and a black embroidered corset.
Tight bust portrait. Face, grey-blue eyes, brows, the choker, the hair parting and separate strands, the corset front zip and tan panel, and the cuff at lower right. The reference render for the face and skin.
Low-angle view looking up at the figure with the demon sword's fleshy edge in the foreground.
Low front three-quarter view from her right, looking up. Her face from below, the raised arm and the pistol grip above her head, the full length of the flesh section on the sword, and the arch and rubble wall at the bottom of the frame. Shows the sword's teeth from the front better than any other view.