Chibi Anya Forger by Tanuki Figures - Kit Overview

Tanuki Figures' Anya Forger is a three-part chibi, fists on her hips and grinning, in the black Eden Academy dress with gold cuffs and hem. Every part comes presupported, and the studio hollowed her oversized head.

Share
Front view of a chibi girl with a pink bob and black cone hair ornaments, grinning with her fists on her hips, in a black dress with gold cuffs and a gold hem, on a round black base.

Anya Forger from Spy x Family, by Tanuki Figures, as a chibi. She stands on a plain round base with her fists on her hips and her mouth open in a wide grin, in the black Eden Academy dress with its gold cuffs and gold hem.

What's notable is how little there is to it. It is three parts, every one presupported, and the studio hollowed the big head in the presupported file.

This post is written from the studio's files and renders. I have not printed it yet.

At a glance

  • Studio: Tanuki Figures
  • Character and source: Anya Forger, Spy x Family (anime)
  • Section: Anime
  • Versions and sizes: One figure, supplied two ways: raw STLs in No_Supported/ and presupported STLs in Supported/STL/. 117 × 59 × 56 mm (H×W×L) on its base, from the studio's Printing & Scale Guide.txt. It is a chibi, so I give the size, not a scale.
  • Parts per version: 3 in each: base, torso, head. There are no alternates, so one build is all three.
  • Presupports: Yes, all three parts, as _SUP.stl files, with a Lychee .lys scene for each part in the LYS/ folder.
  • Largest part and plate fit: Raw: Head.stl, 59.0 × 66.0 × 51.8 mm. Presupported: Head_SUP.stl, 62.0 × 62.0 × 68.4 mm. The report has all six files fitting a Mars-class plate.
  • Ratings (estimated): Print 1/5 presupported, 3/5 from the raw files; Assembly 2/5; Paint 3/5. Skill tag: intermediate.
  • Status: files reviewed, not printed.
  • Where to get the files: Tanuki Figures on Patreon

The model

Anya stands square to the front with her feet planted apart on the base. Both fists press against her hips, elbows bowed out to the sides. Her head is level and faces straight ahead. It is a proud, planted stance, not an action pose. The chibi proportions do most of the work: the head takes up 66.0 of the figure's 117 mm, and the body under it is short, with stubby legs and small fists. The one bit of movement is the hem of the dress, which flips out at the front on her left.

The details that say who this is are the pink hair and the two black hair ornaments. The hair is a bob that ends at her shoulders and flips out at the ends, with a fringe of pointed strands across her forehead and a single upturned lock rising from the crown. The hair on her right hangs a little lower, and one lock trails down behind her right shoulder. High on each side of her head sits a black cone-shaped ornament pointing out and up, set in a round black rim edged with a gold scalloped band. A short black line shows through a gap in the fringe above her right eye; I can't tell from the renders whether it is a brow or a hair clip. The face is a cartoon face. Large green eyes, each with a darker green ring, a lighter green center, a black pupil and two white catchlights. A heavy black upper lash line, with three short lash flicks at the outer corner of each eye. A small white dot high on each cheek, with three short pink hatch marks beside it for blush. A tiny nose. The mouth is wide open, with a row of white upper teeth and a pink tongue.

The costume, item by item. A white shirt collar with a gold button at the throat and a red ribbon below it, hanging in an inverted V. Around the collar, a square yoke edged in orange-gold. A long-sleeved black dress with a soft sheen and folds at the elbows, flaring out like a bell to just above the knees. Two gold buttons sit at the lower corners of the yoke, and from each a dotted gold line runs down the front to a gold stud just above the hem. At the back, a single dotted gold line runs down the center from the collar to the hem. Wide gold cuffs at the wrists carry a row of sculpted arches and small round studs, with white shirt cuffs showing underneath. The hem is a broad gold band: arches along its top edge, a row of studs below. Under the dress, a strip of bare knee, white knee socks, and glossy black Mary Janes with a strap across the instep.

The base is a plain round black disc, 52.7 mm across and 6.2 mm thick, with a rounded, stepped edge and no scenery. From across the room the figure reads as a big pink head with two black points, over a small black bell with a gold ring at the bottom. The head carries the footprint: it is 59.0 mm across the ornaments, wider than the base, and in the front render the ornament tips stand out past the base's edge by about 3 mm on each side. It is also the heaviest part.

Versions and sizes

  • Raw (No_Supported/)
    • H × W × L (mm): 117 × 59 × 56 on the base (studio's dimensions)
    • Pieces: 3
    • Presupported (format): No
  • Presupported (Supported/STL/)
    • H × W × L (mm): 117 × 59 × 56, the same build
    • Pieces: 3
    • Presupported (format): Yes: 3 _SUP.stl files, with a Lychee .lys scene for each in LYS/

The dimensions are the studio's, and they match the files. The raw head is 59.0 mm wide, the widest part. In the front render, the base scales to the report's 52.7 mm, and at that scale the whole figure measures 117 mm, so the height includes the base. Stacked, the three raw parts add to 6.2 + 57.7 + 66.0 = 129.9 mm, which is 12.9 mm over 117, so about 13 mm of the torso sits up inside the head, under the chin and the hair. The 56 mm depth is more than any single part's (the base is 52.7, the head 51.8), so the assembled head overhangs the base a little front or back.

The presupported set suits most people. All three supported parts fit a Mars-class plate, the largest at 62.0 × 62.0 × 68.4 mm. It is a sensible first kit for a small printer.

The raw set suits someone who wants her bigger or smaller. The studio's guide says never to re-scale the presupported files and to use the no-support version to change scale. It also suits anyone who supports and hollows their own way. The cost is the head, a large solid part that needs hollowing and drain holes before it is worth printing.

About the sizes. Every measurement in this post comes from the sculptor's files or the studio's published size information for the unprinted model. A printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

What's in the download

Raw (No_Supported/)

Sizes are X × Y × Z from the report, with Y running up the figure on these files (the base is 6.2 mm in Y).

Figure

  • Head.stl: Head: face, pink bob and fringe, the upturned lock at the crown, and both black cone ornaments with their gold scalloped rims
    • Size (mm): 59.0 × 66.0 × 51.8
    • Notes: Largest and heaviest part. Solid; hollow it. The upturned lock and the cone tips are its thinnest points
  • Torso.stl: Body in one piece: dress with collar, ribbon and gold hem band, both arms with gold cuffs and fists on the hips, legs, socks and shoes
    • Size (mm): 42.2 × 57.7 × 27.1
    • Notes: The bowed elbows set the width. The arms make closed loops at the hips. 998,368 triangles, the most in the kit

Base and scene

  • Base.stl: Plain round display base
    • Size (mm): 52.7 × 6.2 × 52.7
    • Notes: Solid disc 6.2 mm thick

How I matched the parts to the renders. The torso's 42.2 mm width matches elbow to elbow in the front render, so both arms are on it. The head's 59.0 mm matches ornament tip to ornament tip, so the ornaments are on the head. The torso is 57.7 mm tall, about 6 mm more than the run from the shoe soles to the top of the collar in the front render, which fits a neck that goes up into the head. I haven't confirmed where the head and torso meet, or whether the neck and the shoes are keyed.

Whole folder. No part here replaces another, so the whole folder is one build.

Presupported. None of these raw files carry supports. Each has a supported twin in Supported/STL/, below.

Anything odd. The torso has twice the head's triangles, 998,368 against 500,398, though it is the smaller part. That is the gold arches, studs, dotted lines and fingers. The kit root also holds the studio's assembly video, Anya_CHIBI_Assembling.mp4. The renders are in Images/.

Presupported (Supported/STL/)

Sizes are the supported boxes.

Figure

  • Head_SUP.stl: Head, supported (raw: Head.stl)
    • Size (mm): 62.0 × 62.0 × 68.4
    • Notes: Hollowed by the studio. Largest supported part; fits Mars-class
  • Torso_SUP.stl: Body, supported (raw: Torso.stl)
    • Size (mm): 48.0 × 42.0 × 62.0
    • Notes: Possibly hollowed; see below. Has 244 degenerate triangles

Base and scene

  • Base_SUP.stl: Base, supported (raw: Base.stl)
    • Size (mm): 62.0 × 55.9 × 28.8
    • Notes: Solid with supports. Tilted in the studio's scene

Whole folder. No alternates, so the three files are one build.

Where the studio hollowed. The head comes in under the raw file even with supports added, so it is hollowed. Its triangle count backs that up: 790,354 supported against 500,398 raw, the biggest jump in the kit, which is what an inner wall plus supports adds. The torso also comes out under raw, which points to hollowing as well. Torso_SUP.stl has 244 degenerate triangles, though, so I trust that comparison less, and I haven't checked where the drain holes are on the hollowed parts. The base comes out heavier than raw, which fits supports on a solid 6.2 mm disc.

Anything odd. Each _SUP.stl has a Lychee scene in LYS/. The guide describes them as editable projects with the studio's tested settings and supports, and says the models are print-tested. The studio tilted the base in its scene: flat it is 52.7 mm across and 6.2 mm thick, and supported its box is 62.0 × 55.9 × 28.8 mm. Don't re-scale these files; the guide says to scale the raw ones instead. The three raw files, Base_SUP.stl and Head_SUP.stl read cleanly, with no degenerate triangles; Torso_SUP.stl is the only file with any.

Presupported, 1/5 (estimated). Three chunky parts, all supported, each with its own Lychee scene, and all three fit a Mars-class plate. The largest, Head_SUP.stl, is 62.0 × 62.0 × 68.4 mm. The heavy part arrives ready: the studio hollowed the head.

The thinnest things in the kit are the upturned lock at the crown, the tips of the two cone ornaments, and the pointed hair ends. They are short and thick at the root. They are the places to clip supports slowly, not a reason to rate it higher. The one flat part, the base, is already tilted in the studio's scene.

Raw, 3/5 (estimated). No supports, and the head is solid: a large part in a 59.0 × 66.0 × 51.8 mm box, and the heaviest in the raw set. Hollow it and add drain holes. The underside, where the torso's neck goes in, is a natural place for the holes, since the join covers it.

The base is a solid disc, 52.7 mm across. Raised flat on supports, its underside is the largest single cross-section in the kit; tilting it the way the studio did keeps each layer small. You also support the upturned lock, the ornament tips, the fists and the underside of the hem yourself.

What keeps it at 3 and not 4 is size. All three raw parts fit Mars-class, and nothing in the kit is thin the way flames or rope are thin.

Assembly difficulty

2/5 (estimated), both sets. Three parts: base, torso, head. That is one more than a 1 allows and well inside the "up to about 8" of a 2.

The joins are easy to hide. The head goes onto the torso at the neck, under her chin at the front. At the back and sides, the hair falls past the collar, so that join is covered in the back renders too. The torso stands on the base on two small shoes, and any seam there sits at the soles, on the base.

The catch is weight. The figure is top-heavy. The head outweighs the torso, and by much more if it is printed raw and solid. The neck carries all of it, and the whole figure stands on two shoes. I would pin the neck, and pin at least one shoe into the base, more so if the head is printed solid.

There are no tiny parts and nothing hangs. The studio includes an assembly video, Anya_CHIBI_Assembling.mp4.

Paint difficulty

3/5 (estimated). The face is a cartoon face, which on its own points to a 2. Three things push it to a 3.

First, the eyes. They are large, and each one is freehand work: a dark green ring, a lighter center, a black pupil, two catchlights, the heavy lash line and the three lash flicks, matched on both sides. Add the white cheek dots and pink hatch marks, the teeth and the tongue.

Second, the gold. It is small detail over black: the arches and studs on both cuffs and the hem band, the two dotted lines down the front and one down the back, the two front buttons and the two studs those lines end in, the collar button, and the scalloped rims on the ornaments. Every edge of it shows against the dress.

Third, the count of materials. Pink hair, skin, the black dress, metallic gold, the orange-gold yoke edging, a white collar, a red ribbon, white shirt cuffs and socks, glossy black shoes, black ornaments and the base. Black is the hardest of those to shade well, and the dress is the biggest area of it.

What keeps it off a 4 is that the skin and face are stylized, not realistic, and there is no painted pattern or texture beyond the sculpted trim. The hair is the largest painted surface, and a soft blend from crown to ends is optional, not required.

Paint reference. From the studio's colored renders, all on a teal backdrop. The hair is a warm salmon-pink, lighter and more peach on the crown and the tops of the strands, deepening to a rosier pink in the shadows between them. Skin is pale ivory, warm pink at the cheeks, knees and knuckles. The eyes are bright emerald green with a darker green ring and a lighter green center, black pupils, white catchlights and white surrounds; lashes and lash flicks are black. The blush is a white dot and short pink hatch marks. The mouth is deep pink inside, with a lighter pink tongue and white teeth. The ornaments are matte black with soft gray highlights, ringed in gold scallops. The dress is black with a soft sheen and charcoal-gray highlights along the folds. The yoke edging is orange, warmer and flatter than the metallic gold. The collar is white, the ribbon red, and the collar button gold. The cuffs, hem band, buttons, studs and dotted lines are bright yellow gold, with deep bronze-brown in the recesses of the arches and around the studs. The shirt cuffs and socks are white with pale blue-gray shading. The shoes are glossy black with sharp white highlights. The base is matte charcoal, nearly black, with a soft gray highlight along its rounded edge.

The renders below are the studio's, in the studio's order. All five sit on a plain teal backdrop, with the Tanuki Figures logo at top left and a Patreon logo at bottom right. Three are full length and two are close crops.

Front view of a chibi girl with a pink bob and black cone hair ornaments, grinning with her fists on her hips, in a black dress with gold cuffs and a gold hem, on a round black base.
Full length from straight in front, the camera a little above the base. Anya stands with her fists on her hips and her mouth open, the two black ornaments at the top of her head and the upturned lock between them. The front of the dress shows the collar, the red ribbon, the orange-gold yoke, the two dotted gold lines ending in studs, the gold cuffs and the hem band flipping out on her left. It is the feature image and the clearest full front of the costume and the base.
Full-length back view of the chibi figure, showing the back of her pink bob, the black ornaments, and a black dress with one gold line down the center to a gold hem.
Full length from straight behind, the same framing as 01. The back of the bob falls in layered, pointed strands past the collar, with one lock trailing lower behind her right shoulder. A single dotted gold line runs down the center back to the hem band, and the fists show from behind at her hips. It is the only full view of the back: the hair, the back of the dress, the hem band all the way round, and the heels of the shoes.
Three-quarter view of the grinning pink-haired chibi in a black dress with gold trim, fists on her hips, on a round black base.
Full length, front three-quarter from her right. The ornament on her right is in full profile, cone and gold-scalloped rim, and the head shows its depth front to back. The hem's flip at her left front stands out, and the strap of the Mary Jane shows on her right shoe. It is the only angled view, and the best one for the head's volume and the way the elbows bow out from the hips.
Close front view of the chibi's face, with big green eyes, blush marks and an open grin, framed by pink hair and black ornaments, above a white collar with a red ribbon.
Close crop from the top of the upturned lock to the waist, from the front. The face fills the frame: the green eyes with their rings, catchlights and lash flicks, the white cheek dots and pink hatch marks, the teeth and tongue, and the black line in the fringe above her right eye. Below it, the white collar with its gold button, the red ribbon, the yoke edging, the two gold buttons and the sculpted arches and studs on the cuffs. It is the closest look at the face and the collar.
Close back view of the chibi's pink bob and black cone ornaments with gold trim, above a black dress with a gold line down the back.
Close crop from the top of the upturned lock to the waist, from behind. The sculpted strands of the bob fill most of the frame, and both ornaments show their round black rims and gold scallops from the back. The orange collar edging peeks out at the nape under the hair, the dotted gold line runs down the center back, and the gold cuffs and fists show from behind. It is the closest look at the hair sculpt and the ornament rims.