Rock Lee by Tanuki Figures - Kit Overview

Rock Lee from Naruto, by Tanuki Figures: a 250 mm statue of him in his fighting stance on a cracked green arena floor, open hand raised, with sand tendrils sweeping up around him. It comes split with presupports or as two merged files for large printers.

Share
Rock Lee in a wide fighting stance on a cracked green stone floor, one hand raised, with tan sand tendrils sweeping up around him.

Rock Lee from Naruto, by Tanuki Figures: a 250 mm statue of him in his fighting stance on a cracked green arena floor, open hand raised, with sand tendrils sweeping up around him. It comes split with presupports or as two merged files for large printers.

This post is written from the studio's files and renders. I have not printed it yet.

At a glance

  • Studio: Tanuki Figures
  • Character and source: Rock Lee, Naruto (anime)
  • Section: Anime
  • Versions and sizes: One statue, 250 × 236 × 190 mm (H × W × L), from the studio's ImportantNotes.txt, which gives no scale. It comes as a split kit, raw and presupported, or as two merged files for large printers.
  • Parts per version: Split: 22 pieces for one build (9 figure, 13 base) with the separate head and hair, or 21 with the one-piece head. Merged: 2.
  • Presupports: Split kit only, as _SUP.stl files in Supported/Rock Lee/STL and Supported/Base/STL. Every raw split file has a presupported twin. ImportantNotes also lists editable LYS project files. The merged files are raw only.
  • Largest part and plate fit: Split, presupported: Sand_6_SUP is the longest file (142.2 × 79.1 × 73.1 mm) and Leg_SUP the largest figure file (139.9 × 66.4 × 87.4 mm). All 23 fit a Saturn-class plate. Only Sand_7_SUP (125.1 × 99.9 × 122.0 mm) needs Saturn-class; the other 22 fit Mars-class. Split, raw: every file fits Mars-class. The largest boxes are Sand_7 (83.7 × 134.1 × 62.8 mm) and Leg (105.5 × 79.7 × 88.9 mm), and the heaviest part is Base_3, a solid plinth quarter. Merged: Base_Merged (236.8 × 193.8 × 190.8 mm) and RockLee_Merged (145.2 × 232.4 × 181.8 mm) are too big for Saturn-class in any orientation.
  • Ratings (estimated): Split: Print 3/5, Assembly 4/5, Paint 3/5. Merged: Print 5/5, Assembly 1/5, Paint 3/5. Skill: advanced.
  • Status: files reviewed, not printed
  • Where to get the files: Tanuki Figures on Patreon. Links are at the bottom.

The model

Lee stands in a wide, low fighting stance on a cracked green floor. His right leg steps out to his right with the knee bent, his left leg is bent behind him, and both blue sandals sit flat on the tiles. His right hand is up in front of him at chest height, open, fingers together and pointing up, with the back of the hand to the front. His left arm is bent back behind him with the hand in a bandaged fist. In the front views the fist peeks out beside his chest; the rear view shows it pulled back behind his body. His body turns a little away and his head turns back toward the viewer.

The sand does the framing. Tendrils of it rise from the floor on both sides of him, curl and twist up past his legs, and the tallest reach about his shoulder. Others lie low and wrap around his feet, and a few curl out past the edge of the plinth.

The identifying details are all there: the glossy black bowl cut with its straight-cut bangs and loose strands flicking out at the sides, the thick black eyebrows, the big round eyes, the green bodysuit, the orange leg warmers and the bandaged forearms. One playful touch: the shine on his hair is drawn as white block letters spelling NINJA, running around the crown where an anime highlight would usually go. I can't tell from the renders whether the letters are sculpted or only painted on the render. The costume, item by item:

  • A deep green bodysuit with a fine knit texture, a high turtleneck collar and long sleeves. The legs bag a little where they tuck into the leg warmers.
  • Off-white bandage wraps on both forearms, from just below the elbow over the backs of the hands, with the fingers bare.
  • A crimson sash wound several times around his waist. In the rear view it's knotted at the back with two short tails.
  • On the front of the sash, a dark gunmetal plate engraved with a spiral leaf symbol, with a rivet at each corner and silver wear on the edges.
  • On his right thigh, white bandage wraps with a navy band through the middle, and above them a small navy pouch strapped to the outside of the thigh, closed with a snap.
  • Orange leg warmers from below the knee to the ankle, with sculpted vertical ribs lined in dark brown and soft horizontal folds.
  • Royal blue open-toed sandals with thick ridged soles and a small rivet on the side. His toes are bare.

The face is anime-styled, not realistic. The eyes are big white circles with solid round black pupils, outlined in black, with three short black lash ticks at the outer lower corner of each. The eyebrows are heavy black blocks set low and angled in. The nose is small and straight, and the mouth is a closed, confident half-smile. Skin is pale peach with soft pink shading. He looks calm and ready, not angry.

The base is a squarish plinth of gray rock with cracked, layered sides, topped with glossy green tiles broken into irregular slabs. Black cracks run between them, some slabs are lifted or sunk, and small chips lie loose on top. The sand is pale tan with a pitted, granular surface. In the base-only render the tendrils twist like rope, one tall one has holes through it, and some lie in loose rings on the floor. Leaning against the tall tendril, standing on end, is a curved off-white band of five raised blocks. Each block is lettered 根性 in black (roughly "guts" or "grit") and has a blank square tab at one end, and the band is scuffed with gray-brown grime. Its file is Weights.stl. In the main render it stands right behind his right leg. I can't tell whether the characters are sculpted or painted.

The plinth carries the depth and the sand carries the width. Each of the four plinth files is about 96 to 102 mm by 88 to 111 mm, so the rock base is roughly 190 to 200 mm square. The sand pushes the spread out to the studio's 236 mm. Lee is the narrow vertical in the middle, and the top of his hair sets the 250 mm height. The silhouette is his wide stance and raised hand inside a bowl of sand.

Versions and sizes

  • Split kit
    • H × W × L: 250 × 236 × 190 mm
    • Pieces: 22 for one build with Head + Hair (9 figure, 13 base); 21 with Head_W_Hair
    • Presupported (format): Yes: _SUP.stl in Supported/Rock Lee/STL and Supported/Base/STL, one per raw file. ImportantNotes lists LYS project files too.
  • Merged files
    • H × W × L: 250 × 236 × 190 mm
    • Pieces: 2 (RockLee_Merged, Base_Merged)
    • Presupported (format): No, raw only

The size is the studio's, from ImportantNotes.txt. The studio doesn't give a scale. The merged files are at the same size: Base_Merged's box is 236.8 × 193.8 × 190.8 mm, against the studio's 236 mm width and 190 mm depth.

Tanuki Figures also has a separate Rock Lee bust kit; it isn't part of this one.

Who each version suits

Split kit, presupported. This works on a Mars-class printer for everything but Sand_7_SUP, which needs Saturn-class. The studio hollowed the heavy pieces, including the four plinth quarters. It's the version to start with.

Split kit, raw. This is for anyone who wants to hollow and support the parts themselves, or print at a different size. Every raw part fits Mars-class flat. The plinth quarters are solid blocks, though, so you have to hollow them.

Merged files. These are for large-format printers only. You get two pieces instead of 22 and no seams in the sand or the floor. They're raw, so you hollow and support them yourself, and Base_Merged is a large solid part that needs hollowing and drain holes.

About the sizes. Every measurement in this post comes from the sculptor's files or the studio's published size information for the unprinted model. A printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

What's in the download

The kit has raw STLs in No_Supported/, split into Rock Lee, Base and Merged folders. The presupported _SUP.stl files are in Supported/Rock Lee/STL and Supported/Base/STL. Renders are in Images/. The kit root also holds the studio's assembly video, RockLee_FULLSIZE_Assembling.mp4. I haven't watched it yet.

ImportantNotes.txt gives the dimensions and a contents list: no-supported and pre-supported STL files, editable pre-support project files (STL and LYS), render images, and the assembly guide video. It points to the studio's Patreon. My report covers only the STL files.

If you want a different size, scale the raw files and support them yourself. The presupported files are set up for the studio's size.

Split kit, raw files

Folders: No_Supported/Rock Lee (10 files) and No_Supported/Base (13 files).

Figure

  • Torso.stl: Upper body; by elimination it carries both arms, since only the hands are separate
    • Size mm: 44.1 × 86.4 × 103.3
    • Notes: Heaviest figure part; Mars-class
  • Leg.stl: Hips and both legs down to the leg warmers (one file, by size)
    • Size mm: 105.5 × 79.7 × 88.9
    • Notes: Largest figure part by bounding box
  • Foot_L.stl: Left lower leg; by size, the orange leg warmer down through the sandal
    • Size mm: 49.9 × 85.9 × 52.0
    • Notes: Weight-bearing
  • Foot_R.stl: Right lower leg, leg warmer and sandal
    • Size mm: 53.1 × 80.4 × 59.6
    • Notes: Weight-bearing
  • Hand_R.stl: Right hand; by its 57.8 mm length, the open raised hand
    • Size mm: 26.9 × 43.8 × 57.8
    • Notes: Fingers are thin
  • Hand_L.stl: Left hand; by elimination, the fist
    • Size mm: 40.5 × 23.0 × 35.6

Accessories

  • Leg_Bag.stl: The navy thigh pouch (by name and size)
    • Size mm: 18.6 × 22.0 × 24.9
    • Notes: Smallest file in the kit; easy to lose
  • Weights.stl: The curved band of five 根性 blocks
    • Size mm: 51.8 × 50.4 × 45.0
    • Notes: Lives in the Base folder; thin curved band

Alternates: head — Head + Hair, or Head_W_Hair

  • Head.stl: Head without hair
    • Size mm: 40.4 × 36.4 × 36.7
    • Notes: Split pair with Hair
  • Hair.stl: The hair cap
    • Size mm: 42.5 × 29.0 × 37.9
    • Notes: Split pair; strand ends are thin
  • Head_W_Hair.stl: Head and hair in one piece
    • Size mm: 42.5 × 48.0 × 40.0
    • Notes: Use instead of Head + Hair

Base and scene

  • Base_1.stl: Plinth quarter: gray rock with green tiles on top (by name and size)
    • Size mm: 101.2 × 33.7 × 88.3
    • Notes: Solid; hollow it
  • Base_2.stl: Plinth quarter
    • Size mm: 101.9 × 35.0 × 110.9
    • Notes: Solid; hollow it
  • Base_3.stl: Plinth quarter
    • Size mm: 98.5 × 33.1 × 110.8
    • Notes: Solid; heaviest file in the split kit
  • Base_4.stl: Plinth quarter
    • Size mm: 95.9 × 36.3 × 88.9
    • Notes: Solid; hollow it
  • Sand_1.stl: Sand tendril section
    • Size mm: 72.4 × 93.3 × 69.1
    • Notes: Thin, spread across a big box
  • Sand_2.stl: Sand tendril section
    • Size mm: 78.9 × 42.1 × 80.1
  • Sand_3.stl: Sand tendril section
    • Size mm: 80.4 × 60.1 × 87.2
  • Sand_4.stl: Sand tendril section
    • Size mm: 29.4 × 67.4 × 74.0
    • Notes: Smallest sand piece; thin
  • Sand_5.stl: Sand tendril section
    • Size mm: 122.8 × 76.7 × 83.1
  • Sand_6.stl: Sand tendril section
    • Size mm: 123.5 × 91.3 × 53.9
  • Sand_7.stl: Sand tendril section
    • Size mm: 83.7 × 134.1 × 62.8
    • Notes: Heaviest sand piece; longest raw part at 134.1 mm
  • Sand_8.stl: Sand tendril section
    • Size mm: 104.5 × 56.4 × 80.0

A few things in these folders are worth knowing before you sort them:

  • The head comes two ways: Head.stl plus Hair.stl, or the one-piece Head_W_Hair.stl. The split pair lets you paint the black hair away from the face; the one-piece head saves a seam around the hairline. Use one or the other.
  • Leg_Bag.stl isn't an alternate leg. It's 18.6 × 22.0 × 24.9 mm, against 105.5 × 79.7 × 88.9 mm for Leg.stl, which fits the small pouch on his right thigh. A build uses both.
  • There are no arm files, so the arms must be part of Torso.stl. There's no file for the sash or the thigh wraps either, so they're sculpted onto the torso or leg pieces.
  • Weights.stl sits in the Base folder, not the figure folder. It's the band of 根性 blocks that stands on the floor behind him.
  • I can't tell from the renders which sand file is which tendril. The renders show no cut lines.

Whole folders. The figure folder is 10 files, counting both head options. The base folder is 13 files, and a build uses all of it: the four plinth quarters, the eight sand sections and the weights.

One build:

  • Figure with Head + Hair: 9 pieces.
  • Figure with Head_W_Hair: 8 pieces.
  • Whole statue with Head + Hair: 22 pieces. With Head_W_Hair: 21 pieces.

Split kit, presupported files

Folders: Supported/Rock Lee/STL (10 files) and Supported/Base/STL (13 files).

Figure

  • Torso_SUP.stl: Upper body with arms
    • Size mm: 114.0 × 55.6 × 94.1
    • Notes: Hollowed
  • Leg_SUP.stl: Hips and legs
    • Size mm: 139.9 × 66.4 × 87.4
    • Notes: Hollowed; largest figure file
  • Foot_L_SUP.stl: Left leg warmer and sandal
    • Size mm: 54.5 × 74.0 × 89.0
    • Notes: Partly hollowed
  • Foot_R_SUP.stl: Right leg warmer and sandal
    • Size mm: 56.5 × 87.6 × 81.2
    • Notes: Partly hollowed; 224 degenerate triangles
  • Hand_R_SUP.stl: Open right hand
    • Size mm: 71.3 × 30.8 × 48.6
    • Notes: Solid; the extra is supports
  • Hand_L_SUP.stl: Left fist
    • Size mm: 36.0 × 48.4 × 46.1
    • Notes: Solid; the extra is supports

Accessories

  • Leg_Bag_SUP.stl: Thigh pouch
    • Size mm: 26.5 × 34.8 × 25.7
    • Notes: Solid; the extra is supports
  • Weights_SUP.stl: The 根性 band
    • Size mm: 69.2 × 58.7 × 38.4
    • Notes: Solid; the extra is supports

Alternates: head — Head + Hair, or Head_W_Hair

  • Head_SUP.stl: Head without hair
    • Size mm: 52.3 × 54.7 × 53.8
    • Notes: Partly hollowed
  • Hair_SUP.stl: Hair cap
    • Size mm: 50.6 × 47.4 × 35.0
    • Notes: Partly hollowed
  • Head_W_Hair_SUP.stl: Head and hair in one piece
    • Size mm: 50.0 × 52.9 × 58.8
    • Notes: Hollowed; 224 degenerate triangles

Base and scene

  • Base_1_SUP.stl: Plinth quarter
    • Size mm: 111.4 × 106.3 × 71.5
    • Notes: Hollowed
  • Base_2_SUP.stl: Plinth quarter
    • Size mm: 115.4 × 118.3 × 69.3
    • Notes: Hollowed
  • Base_3_SUP.stl: Plinth quarter
    • Size mm: 110.2 × 120.7 × 75.6
    • Notes: Hollowed; heaviest presupported file
  • Base_4_SUP.stl: Plinth quarter
    • Size mm: 108.7 × 111.4 × 71.8
    • Notes: Hollowed
  • Sand_1_SUP.stl: Sand tendril section
    • Size mm: 72.0 × 62.4 × 125.4
    • Notes: Solid; the extra is supports
  • Sand_2_SUP.stl: Sand tendril section
    • Size mm: 100.0 × 68.5 × 79.4
    • Notes: Solid; the extra is supports
  • Sand_3_SUP.stl: Sand tendril section
    • Size mm: 110.2 × 90.0 × 66.1
    • Notes: Solid; the extra is supports
  • Sand_4_SUP.stl: Sand tendril section
    • Size mm: 89.3 × 46.9 × 51.1
    • Notes: Solid; the extra is supports
  • Sand_5_SUP.stl: Sand tendril section
    • Size mm: 90.2 × 83.0 × 135.7
    • Notes: Solid; the extra is supports
  • Sand_6_SUP.stl: Sand tendril section
    • Size mm: 142.2 × 79.1 × 73.1
    • Notes: Longest presupported file; 160 degenerate triangles
  • Sand_7_SUP.stl: Sand tendril section
    • Size mm: 125.1 × 99.9 × 122.0
    • Notes: Hollowed; the only file that needs Saturn-class
  • Sand_8_SUP.stl: Sand tendril section
    • Size mm: 129.1 × 76.2 × 68.4
    • Notes: Hollowed

Every raw split file has a presupported twin with _SUP added to the name, 23 for 23. Nothing is missing.

The biggest change is in the four plinth quarters, which the studio hollowed in the presupported files. Torso, Leg, Sand_7, Sand_8 and the one-piece head are hollowed too. The feet, Head and Hair are at least partly hollowed. The hands, the pouch, the weights and Sand_1 to Sand_6 look solid with supports added.

The head options differ once supported: Head_SUP and Hair_SUP carry two sets of supports against one for Head_W_Hair_SUP, and the one-piece head is hollowed more.

Whole folders. Supported/Rock Lee/STL is 10 files, counting both head options. Supported/Base/STL is 13 files, and a build uses all of it.

One build:

  • Figure with Head + Hair: 9 pieces.
  • Figure with Head_W_Hair: 8 pieces.
  • Whole statue with Head + Hair: 22 pieces. With Head_W_Hair: 21 pieces.

Merged files

Folder: No_Supported/Merged. Tanuki uses _MERGED for uncut single files meant for large printers; these two are the same idea. They're at the same scale as the split kit.

Figure

  • RockLee_Merged.stl: The whole figure in one piece
    • Size mm: 145.2 × 232.4 × 181.8
    • Notes: Too big for Saturn-class in any orientation; no presupports

Base and scene

  • Base_Merged.stl: The plinth and sand in one piece
    • Size mm: 236.8 × 193.8 × 190.8
    • Notes: Too big for Saturn-class in any orientation; solid; no presupports

Here's what each replaces:

  • RockLee_Merged is the whole figure, feet, hands and pouch included. The files can't say which head was merged, and it doesn't matter for printing.
  • Base_Merged stands in for the split base. Its width and depth match the studio's 236 and 190 mm, so it's the plinth and all eight sand sections. The files can't tell me whether the weights band is fused in or meant to go on separately.

Whole folder. The folder is 2 files. One merged build is 2 pieces. If the weights turn out to be separate, add Weights.stl from the Base folder for 3 pieces.

Split kit, presupported: 3/5. Presupports are there for every part, and all 23 files fit a Saturn-class plate. All but Sand_7_SUP (125.1 × 99.9 × 122.0 mm) fit Mars-class too. That keeps it off a 4.

The studio hollowed the heavy pieces, including the plinth quarters. They're hollow blocks with broad flat tops of tile, so I'd check the drain holes and the angle in Lychee before slicing. A hollow block with a flat face is where suction and trapped resin show up.

The thin parts are what push it to a 3. The sand tendrils taper to points, and the thinnest pieces are very thin for their size. Sand_1 spreads across a 72.4 × 93.3 × 69.1 mm box, and Sand_4 across 29.4 × 67.4 × 74.0 mm. The open right hand has thin raised fingers, the hair has loose strand ends at the sides, and the weights band is a thin curved plate.

Three presupported files have degenerate triangles: Sand_6_SUP, Foot_R_SUP and Head_W_Hair_SUP. I'd run them through Lychee's repair first.

Split kit, raw: 3/5, with more prep. Every raw file fits Mars-class flat, so plate size isn't the issue. Mass is. The four plinth quarters are large solid blocks, and Base_3 is the heaviest of them. Torso, Leg, Sand_7 and Sand_8 are worth hollowing as well. You hollow, drain and support all of it yourself, including the tendril tips and the fingers.

Merged files: 5/5. Both files are too big for a Saturn-class plate in any orientation: Base_Merged at 236.8 × 193.8 × 190.8 mm and RockLee_Merged at 145.2 × 232.4 × 181.8 mm. There are no presupports, and Base_Merged is a large solid part, so it has to be hollowed. This is large-format work only.

Assembly difficulty

Split kit: 4/5. That's 22 pieces with Head + Hair, 21 with the one-piece head. Over 20 pieces and a multi-piece base make it a 4.

The base is the bigger job. Four quarters, Base_1 to Base_4, join into one plinth, and the seams run across the tile top and down the rock sides. The cracks between the tiles may give the seams somewhere to hide, but I can't see the cut lines in the renders. Then eight sand sections go on. Some lie low on the floor and some rise to shoulder height, partly in the air. Those joins are thin, and I'd pin the tall ones.

On the figure, the two feet carry Leg, Torso (the heaviest figure part) and the head. His wide stance spreads the load over two feet, which helps, but I'd still pin the feet to the legs and to the floor. The pouch is a small part at 18.6 × 22.0 × 24.9 mm. If you use Head + Hair, that join runs around the hairline, where the glossy black meets the skin. Head_W_Hair skips it.

Order matters too, going by the renders. Sand curls in front of his feet and lower legs in RockLee_TanukiFigure_1 and RockLee_TanukiFigure_4. He'll likely have to be standing on the base before the front sand pieces go on. The weights band stands on end, leaning against the tall tendril, so it has to be placed against that tendril once it's in.

The studio's assembly video, RockLee_FULLSIZE_Assembling.mp4, is in the kit root. I haven't watched it yet.

Merged files: 1/5. Two pieces: the figure goes onto the base. The figure is one solid piece standing on two feet, so I'd still pin it. If the weights aren't fused into Base_Merged, they're a third, small piece.

Paint difficulty

Split or merged: 3/5. It's the same sculpt either way.

The figure has a lot of materials for its size: skin, glossy black hair, eyes, the green knit bodysuit, the off-white bandages, the crimson sash, the gunmetal plate, the navy pouch and thigh band, the orange leg warmers with their brown stripes, and the blue sandals. The scene adds pale sand, glossy green tiles with black cracks, gray rock, and the off-white weights with black lettering.

What keeps it at a 3 is the style. The face is anime-flat, not realistic, and skin shows only on the face, the fingers and the toes. The knit bodysuit and the granular sand both suit washes and drybrushing, and the sand is most of the surface. The stripes on the leg warmers sit in sculpted grooves, so a dark wash will find them.

The fine work is in a few small places. The eyes need clean black circles on white, with the lash ticks. The 根性 characters on the five weights blocks are ten small characters, and if they aren't sculpted they're freehand. The NINJA lettering on the hair is the same question: sculpted, it's a careful fill, and if not, it's freehand on a curved, glossy surface. Either of those as freehand pushes it toward a 4. There's no glow, no translucent part and no large smooth gradient in this kit.

Paint reference. From the studio's renders, which sit on a dark green-black backdrop under green rim light. That light tints the edges of the hair, shoulders and sand green, so don't read those edges as paint. Skin pale peach with soft pink shading; fingernails and toenails pale beige-pink. Hair glossy black with bright white highlights and the white block letters NINJA around the crown. Eyes white with round black pupils, black outlines and short black lash ticks. Eyebrows solid black. Bodysuit deep forest green with a fine knit texture, lighter on the raised knit. Bandages off-white with light gray shading in the wraps. Sash crimson with darker red in the folds. Belt plate dark gunmetal gray with the spiral leaf symbol and rivets, worn to silver on the edges and scratches. Thigh wraps off-white with a navy band through the middle. Pouch navy with a small snap. Leg warmers saturated orange shading to yellow on the highlights, with dark brown stripes in the vertical grooves. Sandals royal blue with darker blue soles. Weights off-white blocks with black 根性 lettering, a blank tab on each, and gray-brown grime and scuffs. Sand pale tan to khaki, darker brown in the pits. Floor tiles glossy olive green, lighter yellow-green on the edges, with black cracks. Plinth rock mid to dark gray with darker crevices and lighter edges.

Rock Lee in a wide fighting stance on a cracked green stone floor, one hand raised, with tan sand tendrils sweeping up around him.
The full statue in a front three-quarter view from his right side, with the camera a little below his waist. Lee is in his wide stance, head turned to the viewer with a half-smile, open right hand up in front of his chest and the bandaged left fist just beside it. The pouch and the white-and-navy thigh wraps face the camera. The weights band stands on end behind his right leg, with all five 根性 blocks readable. Sand tendrils sweep up on both sides, the left one to about his shoulder, and one curls in front of his far foot. It's the clearest view of the whole composition and the best look at the weights in place.
Side view of the Rock Lee statue showing his raised open hand, pulled-back fist and blue sandals among sand tendrils.
The full statue turned further toward his right side, so his body is close to profile and his face is in three-quarter view. The fist and the open hand are separated here, the fist pulled back at the left and the open hand forward at the right. In frame: the pouch's shape and snap, the sash's loose end at his hip, both sandals in profile with their ridged soles, and the weights band seen from the side behind his legs. It's the best side view of the pose, the pouch and the sandals.
Rear view of Rock Lee showing the knotted red sash at his back and his fist pulled behind him, with sand tendrils curling around the base.
The full statue from behind his left shoulder. The back of the hair is a smooth glossy dome with the NINJA lettering running around it, and the open hand shows past his face. The crimson sash is knotted at the back with two tails, and the fist is pulled back behind his body. The weights band shows as a plain curved arc from behind, and one sandal is seen from behind and the side. It's the only rear view: the sash knot, where the fist sits, the back of the weights, and the back of the plinth and tendrils.
Front view of Rock Lee standing wide-legged with one open hand held out, a band of lettered blocks standing between his feet.
The full statue from the front, close to square-on. His right arm is out to the side with the open hand up, and his left arm is bent behind his back. The belt plate faces the camera with its spiral leaf symbol. Both feet are planted wide at the edges of the floor, and the weights band stands upright between his legs, in front of the tall tendril. It's the clearest front view of the stance, the belt plate, and the tall center tendril with the hole through it.
Close-up of Rock Lee smiling over his raised bandaged hand, with white letters spelling NINJA in the shine on his black hair.
A close crop from his hair to his waist, with the open right hand in the foreground at left. In frame: the fingernails and the bandage layers across the knuckles and forearm, the big round eyes with their lash ticks, the heavy brows and the half-smile, the NINJA lettering across the hair, the knit texture of the turtleneck, and the scratched belt plate with its rivets. The fist shows at the lower left and sand tips frame the bottom corners. It's the best look at the face, the bandage sculpt and the fabric texture.
Overhead view of the cracked green tile base with twisting sand tendrils and a band of blocks lettered 根性 leaning against one of them.
The base alone, without the figure, from above at a steep angle. In frame: the glossy green tiles broken into slabs with black cracks, some sunk and some lifted, small loose chips, the gray rock edge, the sand tendrils twisting like rope and lying in loose rings, a hole through the tall tendril, and the weights band leaning against it with its 根性 blocks, blank tabs and grime. It's the only view of the floor and sand without Lee in the way, and the closest look at the weights.