Vault Boy by Tanuki Figures - Kit Overview
A 112 mm desk-size Vault Boy in three presupported parts: wink, thumbs up, Vault 33 jumpsuit, round black base. Written from the files and renders before printing.
Vault Boy, from the Fallout video game series, by Tanuki Figures. What's notable here is the size: this is a three-part, 112 mm desk figure from a studio that mostly ships 300 mm-plus statues, and every part is presupported and fits a Mars-class plate.
At a glance
- Studio: Tanuki Figures
- Character and source: Vault Boy, Fallout (video game series)
- Section: Fan art
- Versions and sizes: one build. 112 mm H × 55 mm W × 72 mm L assembled, per the studio's
ImportantNotes.txt(X 55, Y 112, Z 72). The notes give no scale. - Parts: 3 (
Base.stl,Body.stl,Head.stl) - Presupports: yes, all three parts, as STLs in
Supported/plus one root Lychee project,Vault_Boy_Project.lys - Largest part and plate fit:
Body.stl, 49.7 × 89.0 × 65.0 mm raw; 86.7 × 61.8 × 100.0 mm as supported. Everything fits Mars-class. - Ratings (estimated): Print 1/5, Assembly 2/5, Paint 2/5. Skill tag: beginner.
- Status: files reviewed, not printed
- Where to get the files: Tanuki Figures on Patreon and Tanuki Figures on Gumroad
This post is written from the studio's files and renders. I have not printed it yet. Ratings are estimates from the STLs; the review block comes after it's off the plate.
The model
The pose is the one everybody knows. Vault Boy stands square on a round base, weight even on both feet, left arm raised with a thumbs up angled toward the viewer, right hand closed on his hip. His head is tilted a touch to his right, and he's winking his right eye. The raised arm is what carries the footprint: in the side render the thumb sits well forward of the body, which is why the assembled depth (72 mm) is larger than the width (55 mm).
The identifying details are all there. The hair is a swept yellow quiff with a pointed curl at the crown, a short yellow sideburn in front of each ear, and a smooth cap of yellow at the back. The eyebrows are thick black arcs, the open eye is a black oval, the closed eye is a single black line, and the mouth is a wide grin with a white row of teeth and a small black chin line under it. The face itself is smooth and rounded with big ears, the cartoon proportions kept intact rather than restyled.
Costume, item by item: a blue jumpsuit with a yellow collar, a yellow vertical stripe from collar to belt on the front, a yellow belt band, and a yellow "33" on the left chest and again across the upper back. The legs are plain blue with no pockets or seams modeled. The boots are near-black. The hands and face are a pale peach skin tone. The "33" and the collar and stripe are modeled as raised shapes, not painted-on decals, so they'll read even under a single flat coat.
The base is a low round black disc, roughly 55 mm across and 8 mm tall, with a cog shape in shallow relief on top. Both feet sit on the cog. Nothing else is in the scene. The silhouette is simple and very readable from any side: big head, thumbs up, and the wide cog disc under it.
Versions and sizes
- Standard (only build)
- H × W × L (mm): 112 × 55 × 72
- Pieces: 3
- Presupported: Yes, STL in
Supported/plusVault_Boy_Project.lys
Dimensions are from ImportantNotes.txt; the STL bounding boxes agree with them (body 89.0 mm tall, head 30.2 mm, base 7.9 mm, with overlap at the joins). There's only one version. It suits anyone with a Mars-class printer who wants a quick weekend print, and it's a sensible first paint job for someone new to figures. The notes give no scale; 112 mm is desk-figure size.
About the sizes. Every measurement in this post comes from the sculptor's files or the studio's published size information for the unprinted model. A printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.
What's in the download
Standard build — raw files in No_Supported/
Figure
Body.stl: Jumpsuit, both arms, both hands, boots, from neck down- Size (mm): 49.7 × 89.0 × 65.0
- Notes: Largest part. Thumb is the thinnest element. I can't tell from the renders whether the neck has a peg or socket.
Head.stl: Head and hair, neck stub- Size (mm): 27.3 × 30.2 × 29.6
- Notes: Hair curl at the crown is the only pointed bit
Base and scene
Base.stl: Round black disc with cog relief- Size (mm): 54.6 × 7.9 × 54.6
- Notes: Flat disc, wide and low. I can't tell from the renders whether the feet peg in or sit flat.
Three parts, solid as modeled.
Standard build — presupported files in Supported/
Figure
Body.stl: Body, tilted, on supports- Size (mm): 86.7 × 61.8 × 100.0
- Notes: Solid; the extra over raw is supports
Head.stl: Head on supports- Size (mm): 47.5 × 42.5 × 39.0
- Notes: Solid; the extra over raw is supports
Base and scene
Base.stl: Base on supports- Size (mm): 61.5 × 26.5 × 61.6
- Notes: Solid; the extra over raw is supports
What's presupported: all three parts. The Supported/ folder holds the three STLs directly, same names as the raw files with no _SUP suffix, so keep the two folders apart when loading them. There's a single root Vault_Boy_Project.lys rather than one Lychee project per part, which is the older Tanuki layout. Anything odd: the folder contains desktop.ini leftovers from the studio's Windows machine; they do nothing. There is no assembly video with this kit.
Print difficulty
1/5 (estimated). Three small, chunky parts, all presupported, all fit Mars-class with room to spare. The report shows 0 parts missing Mars-class and 0 missing Saturn-class.
Body.stlis the largest at 49.7 × 89.0 × 65.0 mm raw. The studio's supported version is tilted to 86.7 × 61.8 × 100.0 mm, which still sits inside a Mars-class plate (143 × 90 × 175) flat.- The one thin element is the thumb on the raised hand. It's short and fat by figure standards, and presupported.
- No cupped surfaces. The base is a flat disc, 54.6 mm across and 7.9 mm tall; the supported version is 26.5 mm tall, so it's lifted off the plate on supports rather than printed flat on the build surface.
- The studio did not hollow these. Every supported file is heavier than its raw file: the parts are left solid and the supports add the difference. At this size that's fine; there's no shell to trap resin.
- The three supported footprints look like they'd share one Mars-class plate, but that's a slicer check, not something the report settles.
Assembly difficulty
2/5 (estimated), and at the bottom end of that. Three pieces: head onto body at the neck, body onto base at the feet. That's one part over the "one or two pieces" anchor for a 1.
- The neck join is under the yellow collar, which is modeled as a raised ring, so any seam there is on a color change and mostly hidden.
- The feet-to-base join is at the sole of two near-black boots on a black cog. A seam there is not going to show.
- Nothing hangs. The raised thumbs-up arm is part of
Body.stl, not a separate piece, so there's no join at the shoulder to worry about. No pinning needed. - What I can't see from the renders is whether the neck and feet use pegs and sockets or are flat contact faces.
Paint difficulty
2/5 (estimated). A few flat colors, simple shading, cartoon face.
- Materials count is low: blue jumpsuit, yellow trim, skin, yellow hair, black boots, black base, plus black and white for the face. Six or seven colors, none of them a gradient or a texture.
- The face is the whole job. Black eyebrows, one black oval eye, one black line for the wink, a black smile line with white teeth, and a small chin mark. These are all crisp raised or recessed shapes on the model, so they take a fine brush but not a steady freehand.
- The yellow stripe, collar, belt, and "33" are all raised on the surface. A masked or careful-brushed edge along a modeled step is much easier than a freehand line.
- No fur, metal, glow, or pattern. Cartoon skin, one flat tone with a light wash at most.
Paint reference (from the studio's colored renders): jumpsuit, mid saturated blue. Collar, front stripe, belt, and both "33" numerals, flat sunflower yellow. Hair and sideburns, the same yellow, slightly darker in the shadows. Skin, pale peach. Eyebrows, eye, wink line, mouth line, and chin mark, black. Teeth, white. Boots, near-black charcoal. Base disc and cog relief, black with a satin finish in the render.
Gallery




Links
- Want it printed? Get the unpainted kit in the store.
- Studio Patreon: Tanuki Figures on Patreon
- Studio store: Tanuki Figures on Gumroad · Vault Boy on Gumroad