Picture Frame Pack: Akuma, Kakashi Hatake, Leonardo, Magneto, Kenpachi Zaraki by Chibi Station - Kit Overview
Akuma, Kakashi Hatake, Leonardo, Magneto and Kenpachi Zaraki as chibi reliefs, each set in its own standing frame. All five frames are cut to the same 60.9 × 100.0 mm size, and every part fits a small printer.
Akuma from Street Fighter, Kakashi Hatake from Naruto, Leonardo from Teenage Mutant Ninja Turtles, Magneto from X-Men and Kenpachi Zaraki from Bleach, each as a full chibi figure in relief inside its own standing frame.
What's notable is how uniform the set is. All five frames load at exactly 60.9 × 100.0 × 29.3 mm, so they line up as a matched row, and every part in the folder fits a Mars-class plate.
This post is written from the studio's files and renders. I have not printed it yet.
This is the studio's Grand Master pack, though I haven't confirmed the tier name. The renders title it "Chibi Picture Frame Pack."
At a glance
- Studio: Chibi Station
- Characters and sources: Akuma (Street Fighter), Kakashi Hatake (Naruto), Leonardo (Teenage Mutant Ninja Turtles), Magneto (X-Men), Kenpachi Zaraki (Bleach)
- Section: Fan art
- Versions: five picture frames, one per character, plus two stand files
- Size note: The studio doesn't give an assembled height for this kit. The height here, about 3 to 6 inches, is my estimate from the STL files.
- Sizes: the kit has no dimension sheets, so every size here is an STL bounding box, given as x × y × z in mm.
- Frames: 60.9 × 100.0 × 29.3 each, all five identical. y is the height, so each frame is 100.0 mm tall, 60.9 mm wide and 29.3 mm deep.
- Stands:
tripe_01is 41.3 × 78.0 × 41.4 andtrepe_02is 41.4 × 78.0 × 41.4. - Standing in its feet, a frame is roughly 100 mm tall. That's my estimate. The renders show the bottom edge sitting low in the stand, so the stand adds little height.
- Parts per version: each frame is one piece, with border, plates and relief together. Each stand file is one piece.
- Presupports: none. Chibi Station ships raw STLs only in this kit, with no presupported files and no slicer projects.
- Largest part and plate fit: the report names
akuma.stlat 60.9 × 100.0 × 29.3 mm, and the other four frames share that size. Every part fits a Mars-class plate. - Ratings (estimated): Print 3/5, Assembly 1/5, Paint 2/5 (3/5 in full character colors). Skill: intermediate.
- Status: files reviewed, not printed
- Where to get the files: from the studio, Chibi Station.
The model
Every frame is built the same way. A vertical panel sits inside a stepped, layered border with notched corners and grooved side bars. A raised "CHIBI STATION" plate sits at the top with a small diamond on each side. The character's name is on a raised plate at the bottom.
The background inside is flat, covered in rows of short diagonal strokes in relief, like rain. The chibi figure stands out from it full length, with an oversized head, on its own small scene at the bottom of the panel.
Frame by frame:
- Akuma stands square with both fists clenched at hip height. His hair rises in tall spikes over a heavy, furrowed brow, a glare and a downturned scowl. A necklace of big round prayer beads hangs across his shoulders. He wears a gi with the sleeves torn away, and his fists look wrapped. A twisted rope belt is knotted at his waist, the trousers are ragged at the hem, and he's barefoot. He stands on a broken rock ledge over a mass of curling cloud scrolls, with a large demon face, wide nose and heavy brows, at the bottom.
- Kakashi Hatake crouches in a wide stance. One hand drives down and forward holding a spiked ball of lightning, with jagged bolts cracking out from it across the panel. His other hand is raised in front of his chest. His hair sweeps up in spikes, his forehead protector carries the leaf symbol on its plate, and a mask covers his face below large, detailed eyes. He wears a flak vest over long sleeves, with gloves and sandals. The ground is cracked rock and rubble with dust clouds at both sides. A kunai is stuck in it on each side, the right one standing up with its ring on top, and a shuriken is lodged near the bottom right.
- Leonardo lunges with a katana in each hand. One is held across his body at hip height with the blade pointing out to the side. The other is raised at shoulder height with the blade angled down across him. His mask wraps his big round head, with its tails trailing out to one side, over narrowed eyes and gritted teeth. His wrists and hands are wrapped, a strap crosses his chest, and he has a big pad on one knee. Behind one shoulder is what looks like the end of a scabbard. One foot is up on a broken stone block, and the other is planted on a strip of coarse, grainy ground.
- Magneto stands with his legs apart on top of his base. One hand is raised in front of him with the fingers curled, and the other fist is down at his side. He wears his crested helmet with cheek guards and a long cape that sweeps out behind him to one side in deep folds. His suit has lines across the chest and two round studs, with a belt, gloves and tall boots. His base is a large dome with a segmented column under his boots. A big angular plate with a V-shaped notch leans against it, and there's rubble at both sides.
- Kenpachi Zaraki crouches low with his knees wide, leaning in with a wide, toothy grin. His hair bursts out in long spikes, with a tassel-like bunch hanging from one at the top. One hand grips a long, wrapped hilt low across his body, and a huge, broad curved blade fills the space behind him at the upper left. His long coat hangs open with torn, fluttering edges, over a sash and wide trousers. Dark, flame-like wisps rise on both sides of him, and he crouches on a heap of what look like skulls and rubble.
The border sets the footprint. Nothing breaks out of it, and all five frames share one bounding box to the tenth of a millimetre. That tells me the frame itself, not the figure, sets every dimension, including the 29.3 mm depth. In the desk renders, each frame stands upright in a near-black stand with a rounded-top foot at each lower corner. Everything else renders in one charcoal gray.
Versions and sizes
- Frame: Akuma
- Size x × y × z (mm): 60.9 × 100.0 × 29.3
- Pieces: 1, plus stand
- Presupported: No
- Frame: Kakashi Hatake
- Size x × y × z (mm): 60.9 × 100.0 × 29.3
- Pieces: 1, plus stand
- Presupported: No
- Frame: Leonardo
- Size x × y × z (mm): 60.9 × 100.0 × 29.3
- Pieces: 1, plus stand
- Presupported: No
- Frame: Magneto
- Size x × y × z (mm): 60.9 × 100.0 × 29.3
- Pieces: 1, plus stand
- Presupported: No
- Frame: Kenpachi Zaraki
- Size x × y × z (mm): 60.9 × 100.0 × 29.3
- Pieces: 1, plus stand
- Presupported: No
- Stand: tripe_01
- Size x × y × z (mm): 41.3 × 78.0 × 41.4
- Pieces: 1
- Presupported: No
- Stand: trepe_02
- Size x × y × z (mm): 41.4 × 78.0 × 41.4
- Pieces: 1
- Presupported: No
These sizes come from the STL bounding boxes, because the kit has no dimension sheets. On the frames, y is clearly the height.
On the stands, I can't tell from the renders which axis is up. Their 78.0 mm side is longer than a frame is wide. That fits the renders, where the feet sit at a frame's lower corners.
Who each suits:
- One frame suits a fan of one character who wants a quick print.
- The full set suits someone who wants five characters from five series on one shelf, in a matching row, without the footprint of five statues.
- Small printers. Every part fits a Mars-class plate.
- Painters who like drybrushing relief, or who want small, contained panels to practice full-color work on.
About the sizes. Every measurement in this post comes from the sculptor's files or the studio's published size information for the unprinted model. A printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.
What's in the download
Akuma
akuma.stl: Akuma relief frame- Size mm: 60.9 × 100.0 × 29.3
- Notes: One piece; hair spikes and the bead necklace stand proud of the panel
Kakashi Hatake
kakashi.stl: Kakashi Hatake relief frame- Size mm: 60.9 × 100.0 × 29.3
- Notes: One piece; lightning bolts, kunai and shuriken are the finest detail in the pack
Leonardo
leo.stl: Leonardo relief frame- Size mm: 60.9 × 100.0 × 29.3
- Notes: One piece; the lower katana appears to stand off the panel; lightest of the five
Magneto
magneto.stl: Magneto relief frame- Size mm: 60.9 × 100.0 × 29.3
- Notes: One piece; heaviest of the five, just ahead of Akuma
Kenpachi Zaraki
zaraki.stl: Kenpachi Zaraki relief frame- Size mm: 60.9 × 100.0 × 29.3
- Notes: One piece; densest mesh in the pack at 1,650,738 triangles
Stands
tripe_01.stl: Stand- Size mm: 41.3 × 78.0 × 41.4
- Notes: 176 triangles; simple low-poly shape
trepe_02.stl: Stand- Size mm: 41.4 × 78.0 × 41.4
- Notes: 196 triangles; near-twin of tripe_01
Nothing here is presupported. A few things in the folder are worth knowing:
- The stand files are spelled two ways,
tripe_01andtrepe_02. The frames use short names too:leofor Leonardo andzarakifor Kenpachi Zaraki. - The stands aren't helper blocks. Their triangle counts are tiny, 176 and 196, which is what sculptors' cutting and reference blocks usually look like. But they fill only a small part of their bounding boxes, where a reference block would nearly fill its box. They also match the plain near-black stands in the renders.
- The frames are deep but not full. Each frame is 29.3 mm deep but is far from a solid block, so a good part of that depth is empty space. It could be deep steps in the border, a recessed or cut-away back, or something else behind the panel. No render shows the back, so I can't say whether it is flat, recessed or open, or what sets the 29.3 mm depth.
- The mesh densities are high and close together: 1,449,928 triangles on Leonardo up to 1,650,738 on Zaraki.
The stands. The two files are near twins: the same 78.0 mm length, 41.3 against 41.4 mm on one side, and 176 against 196 triangles. The renders show the same stand under every frame and never show it from behind. I can't tell whether these are two takes on one stand or two pieces meant to be used together. I also can't see how a frame seats in its stand, or how many stands each frame takes.
Print difficulty
3/5. The kit ships raw only, so you support everything yourself.
Size isn't the issue. Every part fits a Mars-class plate: the frames at 60.9 × 100.0 × 29.3 mm and the stands at about 41 × 78 × 41 mm.
The reasons it's a 3:
- The back is the open question. The frames are far from filling their 29.3 mm deep bounding boxes, so the back isn't a simple solid slab, and no render shows it. If it's recessed or open, it's a cup. Angled face-out on supports, a cup can trap resin and pull suction, so it needs a vent hole or an orientation that lets it drain. If the back turns out to be flat, laying a frame flat puts a 60.9 × 100.0 mm cross-section on every layer of the slab, which is a lot of peel force. Either way, I'd angle these.
- Supports belong on the back or the edges. The face carries the raised lettering, the rain strokes and all the figure detail, where support marks would show.
- Fine detail stands off the panel. Kakashi's lightning bolts, his ring-topped kunai and the shuriken are the finest parts in the pack. Leonardo's lower katana looks like it stands off the background. The hair spikes on Akuma, Kakashi and Zaraki and Zaraki's tassel are thin at the tips. All of it is attached to the panel. But anything that stands off the background can start as an island at some angles, so I'd check the slicer's island detection before printing.
- Solid panels. The raw frames are solid. These are small enough that hollowing is optional, and some weight helps a frame stand in its feet.
The stands are small low-poly shapes and should print without trouble.
Nothing stands free of a panel and nothing goes past Mars-class, which keeps it from being a 4.
Assembly difficulty
1/5. Each frame is one piece. In the desk renders, the frames sit upright in their stands, with no glue or pins visible.
The renders don't show how a frame seats in its stand, or whether the two stand files go together, as noted in What's in the download. No render shows a frame hanging, either. If you want these on a wall, check the backs first. If there's nothing there to hang from, a sawtooth hanger or an adhesive strip on the back would do.
Paint difficulty
2/5 as rendered. Each frame renders in one charcoal gray across border, plates, panel, rain strokes and figure, and the stands render near-black. To match that, it's a base coat, a dark wash into the recesses, and a drybrush to bring up the relief, the lettering and the rain strokes. The faces are chibi cartoon faces, and in one color they need no more than the wash and drybrush.
3/5 in full character colors. Each panel holds five or more materials, and the details are small at relief depth on a 100.0 mm panel:
- Akuma: hair, skin, the prayer beads, the gi, the rope belt, bare feet, the cloud scrolls and the demon face below.
- Kakashi: hair, the forehead protector's cloth band and metal plate, the mask, the vest and sleeves, gloves, sandals, the lightning, the kunai and shuriken, and rock.
- Leonardo: skin, the mask, wrist and hand wraps, the knee pad and chest strap, two metal blades with their hilts, stone, and the grainy ground.
- Magneto: helmet, cape, suit, gloves, boots, and the dome, column and plate of his base.
- Zaraki: hair and tassel, skin, coat, sash and trousers, the wrapped hilt and the big blade, the flame-like wisps, and the skull heap.
The faces stay cartoon faces in color. Kakashi's large, detailed eyes are the finest face work in the set. Kakashi's lightning is the one place a glow effect would fit, if you want one. That's optional and would push his frame higher.
Paint reference. There are no colored renders in this folder. The studio shows every frame in one charcoal gray, with light catching the raised edges, the lettering and the rain strokes. The stands are near-black. On the pack card, the same gray frames pick up blue from the glow behind them. That's lighting, not paint. If you go to full color, the scheme is yours to choose. The renders don't show one.
Gallery
Some things in these renders aren't part of the model: the round Chibi Station logo badge and the "CHIBI STATION" banner, the "3D PRINTABLE PICTURE FRAME" caption, the "CHIBI GRANDMASTER" and "CHIBI PICTURE FRAME PACK" title card, the blue glow rings and purple-and-cyan flame swirl, and the table, shelves and display figures in the room backdrop.
The "CHIBI STATION" plates and the character names on the frames are different. Those are sculpted into the frames themselves.




Links
- Want it printed? Get the unpainted kit in the store.
- Studio Patreon: Chibi Station on Patreon
- Studio store: Chibi Station on Gumroad
- Cults3D: Chibi Station on Cults3D
- Thangs: Chibi Station on Thangs