Mecha Pharaoh by Hybris 3D Studios - Kit Overview
An Anubis-eared, winged pharaoh queen in black mechanical armor on a ruined-stone base. A Hybris original, thirty parts, fully presupported, written up from the files and renders before I print it.
Mecha Pharaoh, an original design from Hybris 3D Studios. A jackal-eared pharaoh queen with black feathered wings, a segmented mechanical tail, and armored limbs, standing on a broken block of hieroglyph-carved sandstone. What sets this one apart is the mix of materials in one figure: bare skin, glossy black machinery, gold and lapis jewelry, white cloth, and feathers, all on a single stand-and-stare pose.
This post is written from the studio's files and the seven renders. I have not printed it yet. Everything below can be checked against the download.
At a glance
- Studio: Hybris (Hybris 3D Studios)
- Character and source: Mecha Pharaoh. A Hybris original design; there is no source series.
- Section: Fan art
- Versions and sizes: This post covers the costumed build (the figure as rendered, body
v1_body.stlwithv1_breast_cloth.stlandv1_thigh_L.stl/v1_thigh_R.stl). The studio ships no dimension sheet, so sizes here are STL bounding boxes: the longest figure part is the draped wing clothall_ver_wings_cloth_.stlat 93.8 × 152.3 × 58.7 mm, the legs run 141.9 mm (all_ver_leg_R.stl), and the baseall_ver_base.stlis 124.7 × 101.3 mm across and 53.8 mm tall. Assembled on the base, she is about 256 mm tall to the top of the hair, and the jackal ears are the highest point, at about 270 mm. Those heights are my estimates from the raw STL files, which sit in their assembled positions. - Size note: The studio doesn't give an assembled height for this kit. The height here, about 9 to 12 inches, is my estimate from the STL files.
- Parts: 30 for the costumed build.
- Presupports: yes, for all 30 parts, as plain presupported
.stlfiles. No Lychee or other slicer project files. - Largest part and plate fit: raw, every part fits Mars-class, though
all_ver_base.stlandall_ver_wings_cloth_.stlfit only on edge. The heaviest isall_ver_base.stl, a large solid part. Presupported, the largest iswing_R_stl.stlat 168.9 × 59.5 × 79.0 mm, and five presupported parts need Saturn-class as supplied:wing_R_stl.stl,wing_L_stl.stl,leg_L_stl.stl,wings_clorh_stl.stlandbase/base_stl.stl. - Ratings (estimated): Print 4/5, Assembly 5/5, Paint 4/5. Skill tag: advanced.
- Status: files reviewed, not printed.
- Where to get the files: Hybris 3D Studios' Patreon and Gumroad store, linked at the bottom.
The model
She stands square to the viewer with her weight settled on a straight right leg. Her left leg is bent behind the right, so the right foot is a little ahead of the left, heels down on the rubble. The right hand rests open against the right thigh. The left hand hangs at the hip and holds a gold ring with an Eye of Horus charm and a tassel hanging from it. The head sits level and the eyes are half-lidded, looking slightly down at whoever is in front of her. It is a still pose. Nothing is mid-motion except the tail, which snakes from behind the boots out to her left and ends in a raised spike.
The identifying details are the Anubis ears and the nemes. The ears are tall jackal ears, black on the outside with a feathered amber-gold inner surface, and both carry small gold rings. Between them sits a gold circlet with a dark blue dome at the brow, and from it the nemes lappets fall on either side of the face, striped in gold and lapis blue with a gold knot at the top and a gold hoop hanging beside the ear. Long, straight, near-black hair with a blunt fringe runs down past the waist.
Costume, item by item: a broad usekh collar in gold with bands of pale blue and lapis beads. A bodice in a gold-on-black scale-mesh texture, edged by white cloth strips that run over both shoulders, with a small gold sternum ornament that has six hanging bars. Below that, a glossy black mechanical bodysuit cut open over the stomach, with panel lines and small gold rivets, and a black armored hip piece with a hexagonal texture. The arms wear black mechanical gauntlets from above the elbow to the wrist, with a gold band at the top, gold and blue bangles at the wrist, and bare hands with dark nails. The legs are thigh-high glossy black mechanical boots on stiletto heels, with a round bronze-gold knee joint on each and a small guard at each ankle. A long white cloth hangs from her forearms behind her, lies over her left wing and reaches the base on her right. Behind her, two large black wings with brown-edged feathers spread wide and back.
The face is calm and a little imperious: amber eyes, dark liner, closed lips, warm deep-brown skin with a slight sheen in the render. The base is a stack of broken sandstone blocks in tan and brown, several of them carved with hieroglyphs, with a lighter dust on the upper surfaces. In silhouette the wings carry the footprint. They spread wider than the base on both sides and the trailing cloth on her right and the tail spike on her left push it wider still. The figure itself is a narrow vertical column; everything wide is attached to it.
Versions and sizes
- Figure as rendered (
v1_body)- H × W × L: About 256 mm to the top of the hair (270 mm to the ear tips) on the base, my estimate from the STL files. Longest part 152.3 mm (
all_ver_wings_cloth_.stl); legs 141.9 mm; base 124.7 × 101.3 × 53.8 mm - Pieces: 30
- Presupported (format): Yes, all 30 parts (
.stl)
- H × W × L: About 256 mm to the top of the hair (270 mm to the ear tips) on the base, my estimate from the STL files. Longest part 152.3 mm (
This post covers the costumed build. It suits someone who wants a large winged display piece and has a Saturn-class printer, or is willing to resupport the wings, the wing cloth, the left leg and the base for a Mars-class plate. It is not a first kit: the part count and the hanging wings put it in advanced territory before paint is even considered.
About the sizes. Every measurement in this post comes from the sculptor's files or the studio's published size information for the unprinted model. A printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.
What's in the download
All sizes are from the raw STLs in HS_MechaPharaoh_STL_RAW/.
Figure
v1_body.stl: Torso, bodysuit and hips- Size mm (X × Y × Z): 54.2 × 73.9 × 36.0
- Notes: Core part; everything hangs from it
all_ver_head.stl: Head and face- Size mm (X × Y × Z): 20.0 × 36.8 × 20.9
all_ver_hair_front.stl: Fringe- Size mm (X × Y × Z): 40.1 × 54.1 × 19.0
- Notes: Thin for its size
all_ver_hair_back.stl: Long back hair- Size mm (X × Y × Z): 77.8 × 90.0 × 61.1
- Notes: Second-largest figure part
all_ver_hairpad.stl: Hair pad- Size mm (X × Y × Z): 29.1 × 21.1 × 20.1
- Notes: Thin filler piece; I can't tell from the renders whether it sits under the hair or under the headdress
all_ver_ear_L.stl: Left jackal ear- Size mm (X × Y × Z): 10.3 × 23.2 × 10.4
- Notes: Thin tip
all_ver_ear_R.stl: Right jackal ear- Size mm (X × Y × Z): 9.2 × 22.5 × 10.2
- Notes: Thin tip
all_ver_arm_L.stl: Left arm with gauntlet- Size mm (X × Y × Z): 25.5 × 44.6 × 14.6
all_ver_arm_R.stl: Right arm with gauntlet- Size mm (X × Y × Z): 17.1 × 34.5 × 33.5
all_ver_hand_L.stl: Left hand- Size mm (X × Y × Z): 10.4 × 18.5 × 10.4
- Notes: Small; holds the pendant
all_ver_hand_R.stl: Right hand- Size mm (X × Y × Z): 11.9 × 21.1 × 11.0
- Notes: Small; fingers
v1_thigh_L.stl: Left thigh- Size mm (X × Y × Z): 25.3 × 40.5 × 31.9
v1_thigh_R.stl: Right thigh- Size mm (X × Y × Z): 23.9 × 42.2 × 29.0
all_ver_leg_L.stl: Left leg and boot- Size mm (X × Y × Z): 28.8 × 134.3 × 63.9
- Notes: Long; heel
all_ver_leg_R.stl: Right leg and boot- Size mm (X × Y × Z): 28.3 × 141.9 × 33.5
- Notes: Longest figure part after the cloth; heel
all_ver_leg_acc_L.stl: Left ankle guard- Size mm (X × Y × Z): 11.9 × 12.4 × 10.5
- Notes: Small
all_ver_leg_acc_R.stl: Right ankle guard- Size mm (X × Y × Z): 12.5 × 12.6 × 7.7
- Notes: Small
all_ver_tail.stl: Segmented tail with spike- Size mm (X × Y × Z): 59.7 × 120.2 × 62.9
- Notes: Very thin for a 120 mm part; fragile
all_ver_wing_L.stl: Left wing- Size mm (X × Y × Z): 81.9 × 138.0 × 75.6
- Notes: Large; thin feather edges
all_ver_wing_R.stl: Right wing- Size mm (X × Y × Z): 78.4 × 136.6 × 77.7
- Notes: Large; thin feather edges
Cloth
v1_breast_cloth.stl: White shoulder and chest strips- Size mm (X × Y × Z): 33.8 × 40.3 × 27.3
- Notes: Thin sheet
all_ver_wings_cloth_.stl: Long white drape that hangs from her forearms to the base- Size mm (X × Y × Z): 93.8 × 152.3 × 58.7
- Notes: Longest part in the kit; large thin sheet
Base and scene
all_ver_base.stl: Ruined sandstone blocks with hieroglyphs- Size mm (X × Y × Z): 124.7 × 53.8 × 101.3
- Notes: One piece; heaviest part in the kit; solid
Accessories
all_ver_nemes_L.stl: Left nemes lappet- Size mm (X × Y × Z): 16.3 × 43.9 × 19.1
- Notes: Thin striped flap
all_ver_nemes_R.stl: Right nemes lappet- Size mm (X × Y × Z): 15.5 × 45.0 × 17.4
- Notes: Thin striped flap
all_ver_necklace.stl: Usekh collar- Size mm (X × Y × Z): 32.8 × 14.9 × 25.5
- Notes: Thin ring
all_ver_breast_acc.stl: Gold sternum ornament- Size mm (X × Y × Z): 9.5 × 12.9 × 6.1
- Notes: Tiny
all_ver_bracer_L.stl: Left wrist band- Size mm (X × Y × Z): 8.3 × 3.8 × 8.6
- Notes: Tiny ring
all_ver_bracer_R.stl: Right wrist band- Size mm (X × Y × Z): 8.6 × 6.5 × 6.9
- Notes: Tiny ring
all_ver_pendant_.stl: Ring, Eye of Horus charm and tassel- Size mm (X × Y × Z): 11.5 × 39.2 × 6.9
- Notes: 39 mm long and under 7 mm thick; fragile
Companion: none.
What's presupported. Every part. The supported files live in HS_MechaPharaoh_STL_Presuppoted/Mecha_Paraoh/ (the studio's spellings, kept as-is here) and carry a _stl.stl suffix: 26 parts in the folder root, base/base_stl.stl for the base, and v1/v1b_body_stl.stl, v1/v1thigh_L_stl.stl, v1/v1thigh_R_stl.stl for the body and thighs. Two names change between raw and supported: all_ver_breast_acc.stl becomes breast_stl.stl and v1_breast_cloth.stl becomes breast_cloth_stl.stl. The wing cloth is spelled wings_clorh_stl.stl in the supported set.
Anything odd. The raw files carry v1 and all_ver prefixes; this post covers the costumed build. Two raw names end in a trailing underscore (all_ver_wings_cloth_.stl, all_ver_pendant_.stl). There are no Lychee, Chitubox, or text files, and no dimension sheet. None of the STL files has NaN triangles, so the meshes read cleanly.
Print difficulty
4/5 (estimated).
Presupports for every part pull this down from where it would otherwise sit, but four things push it up.
The base. all_ver_base.stl is a large solid part, and the studio's base_stl.stl comes in heavier than raw, so it is supported but not hollowed. That is a solid block with a flat underside going onto the plate as supplied. I would hollow it and add drain holes before printing it this way.
Plate fit. Raw, all 30 parts fit Mars-class, though all_ver_base.stl and all_ver_wings_cloth_.stl fit only on edge. Supported, five parts don't fit Mars-class and need Saturn-class as supplied: wing_R_stl.stl at 168.9 × 59.5 × 79.0 mm, wing_L_stl.stl at 164.6 × 62.7 × 82.6 mm, leg_L_stl.stl at 145.4 × 34.5 × 64.7 mm, wings_clorh_stl.stl at 118.9 × 106.6 × 143.0 mm and base/base_stl.stl at 138.4 × 114.7 × 58.8 mm. The raw versions of all five fit Mars-class, so a Mars-class owner has to resupport those five parts.
Thin parts. all_ver_tail.stl is a thin cable 120 mm long with a spike on the end. The wings run 138 mm, and the feather tips are thin. all_ver_wings_cloth_.stl is a large thin draped sheet, 152 mm long, and v1_breast_cloth.stl is a thin sheet 40 mm long. The pendant is 39 mm long and under 7 mm thick. The bracers are tiny.
Hollowing. None that I can see in the files. Every supported file except the two thighs comes in heavier than its raw counterpart, and the extra is supports. The thighs are the exception: v1_thigh_L and v1_thigh_R come in slightly under raw even with supports on them. I haven't opened the supported thighs to see whether they are hollowed or cut for a socket.
Assembly difficulty
5/5 (estimated).
Thirty parts is the top of the scale on count alone. The base is one piece, which helps, but the figure is split down to hands, ears, wrist bands, nemes flaps, and a tiny sternum ornament, so there are a lot of small joins to place in order.
The wings are the real reason for the rating. Two wings, each larger than the torso, hang off its back, and the wing cloth hangs from her forearms, drapes over the left one and runs to the base on her right. Those are hanging, weight-bearing joins and I would pin them. The tail runs from the body to the base and touches the boots on the way; it needs to be located before the wings go on or it will not thread through.
Visible joins to expect: neck to collar, thighs to body at the hip, thighs to legs at the top of the boots, arms at the gauntlet edge, hair back to head. The collar sits over the neck join, and the gauntlet edge and boot tops are hard material changes, so most seams land on a color break. The thigh-to-hip join is on skin and will show if it is not flush. I cannot see pegs or sockets in the renders, so I can't say how the wing, tail and thigh joins are keyed.
Paint difficulty
4/5 (estimated).
Skin is the biggest single area: face, shoulders, midriff, thighs, hands. It is warm deep brown with a satin finish in the renders, and it has to be smooth across the exposed stomach and thighs where any blotch will show. The face is small, at a 20 × 36.8 × 20.9 mm head, with lined amber eyes and a closed mouth.
Materials: skin, glossy black armor, gold, lapis blue, pale blue, white cloth, the gold-on-black scale mesh of the bodice, near-black hair, brown-black feathers, bronze knee joints, steel tail spike, sandstone. That is well over four. The patterns are the striped nemes flaps, the beaded collar bands, the mesh texture on the bodice, the hexagonal texture on the hips, and the hieroglyphs on the base. No glow effects and no large gradients, which is what keeps it off 5.
Paint reference (from the studio's renders). Skin: deep warm brown, satin. Hair: near-black with warm brown highlights. Ears: black outer, amber-gold feathered inner, gold rings. Circlet: gold with a dark blue dome. Nemes lappets: alternating gold and lapis blue stripes, gold knot at the top, gold hoop. Eyes: amber iris, dark liner. Collar: gold with bands of pale blue and lapis beads. Bodice: gold scale mesh over black, white cloth edging, gold sternum ornament. Bodysuit and hip armor: gloss black with small gold rivets. Gauntlets: gloss black with a gold band at the top. Bangles: gold with blue. Nails: dark red-black. Boots: gloss black with bronze-gold knee discs and gold trim. Tail: black segments, bronze-gold tip fitting, steel spike. Wings: black feathers with warm brown edges. Cloth: off-white with soft grey shadows. Pendant: gold ring, gold Eye of Horus, gold tassel. Base: tan and brown sandstone, lighter dust on top, hieroglyphs picked out in the same stone color.
Gallery







Links
- Studio Patreon: Hybris 3D Studios on Patreon
- Studio store: Hybris 3D Studios on Gumroad · Mecha Pharaoh on Gumroad: Collector Package, Commercial Package
- CGTrader: Hybris 3D Studios on CGTrader
- Cults3D: Hybris 3D Studios on Cults3D · Mecha Pharaoh on Cults3D: Standard, Commercial Package