Rio Futaba by Moon Figures - Kit Overview
A 14-part, single-version Rio Futaba in her school uniform and open lab coat, every part Mars-class, with waterslide eye decals in the download — one of the simpler kits I have looked at.
Rio Futaba, from Rascal Does Not Dream of Bunny Girl Senpai, by Moon Figures. One version, 14 STLs, everything fits a Mars-class plate, and the eyes come as a Photoshop decal file instead of something you have to paint. It is a walking pose in the Minegahara uniform with the lab coat open and her hands in the pockets.
This post is written from the studio's files and the one render in the download. I have not printed this kit yet. Ratings are estimates from the STLs and will be replaced after a print.
At a glance
- Studio: Moon Figures (the drive folder is named
Moon Prints) - Character and source: Rio Futaba, Rascal Does Not Dream of Bunny Girl Senpai
- Section: Anime
- Versions and sizes: one version. The studio ships no dimension sheet, so the size comes from the STL bounding boxes: the base is a 112.5 mm disc, 5.9 mm thick, and the tallest single part is the coat-and-torso piece at 104.0 mm. Stacking legs, torso, and head with normal overlap puts the assembled figure somewhere around 185–195 mm tall on a 112.5 × 112.5 mm footprint (estimate).
- Size note: The studio doesn't give a scale or an assembled height for this kit. The scale (about 1/8) and height (about 6 to 9 inches) here are my estimates from the STL files.
- Parts: 14 STLs (
RioFutaba_0.stlthroughRioFutaba_13.stl), 13 figure parts plus the base - Presupports: one Chitubox project,
stl/RioFutaba.chitubox, holding the studio's supported and plated layout. No separate presupported STLs, and no Lychee scene. - Largest part:
RioFutaba_0.stl, the base disc, 112.5 × 5.9 × 112.5 mm. Fits Mars-class flat. Largest figure part isRioFutaba_6.stlat 92.6 × 104.0 × 82.1 mm, also Mars-class. 0 parts fail Mars-class, 0 fail Saturn-class. - Ratings (estimated): Print 2/5, Assembly 2/5, Paint 2/5. Skill tag: beginner.
- Status: files reviewed, not printed yet
- Where to get the files: Moon Figures' Patreon and Gumroad store, linked at the bottom.
The model
Moon Figures ships a single render with this kit, so everything below comes from that one image and the part list. The render carries the studio's yellow moon logo in the top left corner.
Rio is caught mid-stride, walking toward the viewer's left with both hands buried in the pockets of an open white lab coat. The lead foot is planted flat ahead of her, the trailing foot is still behind, and the coat tails and her hair have been thrown out to the left as if she is walking into a breeze. Her head is turned slightly down and to her right, so the face is presented in three-quarter view while the body moves the other way. It is a quiet pose, no gesture, no prop. The motion is all in the cloth and the hair.
The details that say who this is: the high side ponytail gathered with a yellow scrunchie above her left ear, the glasses, and the lab coat over the school uniform. The hair is a muted ash brown, a grayish olive-taupe rather than a warm brown, and it is modeled in long separated locks that stream out behind her, with a heavy fringe across the forehead and shorter locks framing the face. The glasses are thin-rimmed with a light silver frame and dark, smoked oval lenses; in the render you can see the eyes only faintly through them.
Costume, item by item. The lab coat is plain white, open down the front, with a notched collar, long sleeves, and patch pockets low on each side where the hands sit; the hem falls to about mid-thigh and flares wide to the left. Under it is a white shirt collar with a red necktie, then a tan, camel-colored uniform vest with two visible buttons down the front. Below that is a navy blue pleated skirt with crisp knife pleats, navy knee socks that stop just below the knee, and brown penny loafers with a slightly darker sole. Skin is pale and flat-shaded, as you would expect for this character. The face is calm, mouth closed, eyes half-lidded behind the lenses, no smile.
The base is a plain round disc in a russet, terracotta brown, with faint straight lines scored across the top surface that read as paving or floor tiles. I can't tell from the render whether the lines are modeled into RioFutaba_0.stl. Nothing else on it. From across the room the read is a tall pale column (the white coat) over a dark band (skirt and socks), with the ponytail and the coat tails pushing the silhouette left. The base disc carries the footprint; the figure itself is narrow apart from the coat.
Versions and sizes
- Standard (only version)
- H × W × L: approx. 185–195 mm tall (estimate), 112.5 × 112.5 mm footprint; tallest single part 104.0 mm
- Pieces: 14
- Presupported: Yes, as a Chitubox project (
stl/RioFutaba.chitubox); no supported STLs
There is one version, so the choice is only whether to print it. It suits a Mars-class printer with no compromises; every part fits flat. The base disc is the widest thing in the download and it fits a Mars-class plate diagonally with room to spare. If you want a first anime figure that does not need hollowing decisions or a big plate, this is that kind of kit.
About the sizes. Every measurement in this post comes from the sculptor's files or the studio's published size information for the unprinted model. A printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.
What's in the download
One folder, stl/, holding 14 numbered STLs and the Chitubox project, plus a Decals/ folder with eyes_RioFutaba.psd. The parts are numbered, not named, so the description after each file name below is inferred from each part's size against the render. RioFutaba_0.stl is the base disc; that one is certain from its dimensions.
Figure
RioFutaba_6.stl- What it is (inferred): Torso with open lab coat, shirt collar, and vest, from shoulders to coat hem
- Size mm (X × Y × Z): 92.6 × 104.0 × 82.1
- Notes: Largest figure part; the coat flare gives the width
RioFutaba_10.stl- What it is (inferred): Leg with knee sock and loafer (one side)
- Size mm (X × Y × Z): 14.8 × 67.1 × 29.2
- Notes: Joins under the skirt. I can't tell from the files which leg this is.
RioFutaba_11.stl- What it is (inferred): Leg with knee sock and loafer (other side)
- Size mm (X × Y × Z): 15.5 × 61.5 × 32.6
- Notes: Joins under the skirt. I can't tell from the files which leg this is.
RioFutaba_9.stl- What it is (inferred): Head (face)
- Size mm (X × Y × Z): 22.0 × 19.4 × 22.9
- Notes: I can't tell from the files whether this is the head or the hair cap;
RioFutaba_1.stlis a similar size.
RioFutaba_1.stl- What it is (inferred): Back of head / hair cap, or the ponytail root
- Size mm (X × Y × Z): 21.8 × 24.4 × 20.0
RioFutaba_2.stl- What it is (inferred): Main hair mass with the ponytail
- Size mm (X × Y × Z): 30.7 × 51.3 × 57.4
RioFutaba_3.stl- What it is (inferred): Ponytail bundle behind the scrunchie
- Size mm (X × Y × Z): 19.8 × 35.1 × 17.4
- Notes: Dense for its box
RioFutaba_4.stl- What it is (inferred): Fringe and face-framing locks
- Size mm (X × Y × Z): 34.8 × 40.0 × 26.3
- Notes: Thin for its box
RioFutaba_12.stl- What it is (inferred): Long flowing hair lock
- Size mm (X × Y × Z): 11.6 × 50.9 × 34.6
- Notes: Thin, 11.6 mm at the thickest
RioFutaba_13.stl- What it is (inferred): Long flowing hair lock
- Size mm (X × Y × Z): 11.6 × 56.5 × 31.8
- Notes: Thin, 11.6 mm at the thickest
Cloth
RioFutaba_8.stl- What it is (inferred): Pleated skirt
- Size mm (X × Y × Z): 41.3 × 33.9 × 42.9
- Notes: Sits between torso and legs
RioFutaba_7.stl- What it is (inferred): Necktie
- Size mm (X × Y × Z): 5.3 × 31.2 × 14.1
- Notes: Thin and long; fragile. It could also be a hair strand.
Base and scene
RioFutaba_0.stl: Round base disc- Size mm (X × Y × Z): 112.5 × 5.9 × 112.5
- Notes: Large flat surface
Accessories
RioFutaba_5.stl- What it is (inferred): Glasses
- Size mm (X × Y × Z): 19.2 × 5.0 × 12.8
- Notes: Smallest part; very thin frames
Alternates: none. No alternate heads, hands, or bases in the folder.
Decals: Decals/eyes_RioFutaba.psd, a Photoshop file of printable eye decals. The studio's intent is that the eyes are waterslide decals rather than painted, which matters for the paint rating below. I haven't checked whether the face STL has flat eye surfaces sized for the decals, or whether the psd includes the eyebrows or only the eyes.
What's presupported: the whole kit, as a single Chitubox project. stl/RioFutaba.chitubox is the studio's supported and plated scene and it only opens in Chitubox. There are no supported STLs alongside it, so if you slice in Lychee or anything else you are supporting from the raw files. Anything odd: the parts are numbered rather than named, and the numbering does not follow any obvious order (the base is 0, the torso is 6, the legs are 10 and 11). Nothing missing and no duplicates that I can see. The mesh report skipped 0 degenerate triangles across all 14 files.
Print difficulty
2/5 (estimated). This is close to a 1 and I would call it a 1 if the base were not a slab.
What keeps it easy: every one of the 14 parts fits a Mars-class plate flat, with 0 parts failing Mars-class and 0 failing Saturn-class. Even the two chunky pieces, RioFutaba_6.stl and the base, need no bigger plate. The studio supplies supports and a plated layout in the Chitubox project, so a Chitubox user can open it and print.
What pushes it to a 2. The base disc RioFutaba_0.stl is 112.5 mm across and only 5.9 mm thick, which is a large flat surface. Printed flat on supports it will pull hard on every layer; printed flat directly on the plate it will fight you at removal; tilted, it needs a lot of supports on the underside. None of that is hard, but it is the one part where orientation matters. Then the thin pieces: the glasses RioFutaba_5.stl, tiny, with 5 mm of depth and frame arms that will be a millimetre or so thick at this scale; the tie RioFutaba_7.stl, thin and 5.3 mm wide; and the two flowing hair locks RioFutaba_12.stl and RioFutaba_13.stl, each about 11.6 mm at their thickest and 50–56 mm long. Those want light supports and a gentle removal.
Hollowing: the raw STLs are solid. I cannot tell from the files whether the studio hollowed anything in the Chitubox project, because there are no supported STLs to compare against the raw files.
Assembly difficulty
2/5 (estimated). Fourteen pieces is at the upper end of a 2 and, on the count alone, the anchors would put it at a 3. I am rating it 2 because of where the joins land, not how many there are.
The joins, from the render: two legs meet the body under the skirt hem, where the seam is covered by the skirt and the coat. The skirt sits between the torso piece and the legs, again with the coat hanging over its outer edge. The head meets the collar at the neck, where the shirt collar and the coat lapels hide most of the line. The hair pieces (five of them by my reading: RioFutaba_1.stl, _2, _3, _4, and the two long locks _12 and _13) join into each other along strand lines, which is where hair seams normally disappear. The glasses sit on the face and the tie hangs from the collar; both are small and both are visible, so those two are the joins that need a clean fit and a steady hand.
Nothing hangs. The coat tails are part of the torso piece as far as I can tell, not a separate cape-like part, so there is no large piece to hold while it cures. Nothing is weight-bearing except the legs, which are short, and which stand on a flat disc. I would not expect to pin anything, though a short pin between each leg and the base is cheap insurance for a two-point stance. The only fiddly work is the glasses: a 19 mm frame that has to seat on the bridge of the nose without glue showing. Whether the parts are keyed with pegs is not visible in the render.
Paint difficulty
2/5 (estimated). Lots of colors, none of them hard.
By my count there are a dozen painted items on this figure in about ten colors: pale skin, ash-brown hair, yellow scrunchie, silver glasses frames with dark lenses, white coat, white shirt collar, red tie, tan vest, navy skirt, navy socks, brown loafers, and the brown base. That is more materials than the anchors' "four or more," but every one of them is a flat cel-shaded color with simple shading in the render. There are no patterns, no fur, no metal beyond the thin glasses frame, no glow, no gradients. The skin is flat anime skin on the face and the legs, not realistic skin. And the face is the part that usually decides the rating on an anime figure, and here the studio has taken it off the table: the eyes are meant to be waterslide decals from eyes_RioFutaba.psd. Print them on decal paper, seal, apply, and the hardest freehand job on the kit is gone. Eyebrows and lashes may still need a brush.
Where a 2 can quietly turn into a 3: the white coat is the largest surface on the model and white is unforgiving of thin coats and dust. Priming it well and shading it with a cool gray rather than fighting for pure white will get you most of the way. The pleated skirt rewards a wash in the pleat folds, which is easy. The pale skin against the navy socks needs a clean edge at the sock tops.
Paint reference, from the studio's render. Hair: muted ash brown, a grayish olive-taupe, lighter on the top surfaces of the locks. Scrunchie: soft yellow. Glasses: light silver frames, dark smoked gray lenses with a faint reflection. Skin: pale peach, flat. Lab coat: plain white with soft gray shadow in the folds. Shirt collar: white. Tie: red, a warm tomato red rather than crimson. Vest: tan, camel, with buttons in the same tone. Skirt: navy blue, slightly grayed. Knee socks: the same navy. Loafers: medium brown with a darker brown sole and a lighter tone on the strap. Base: russet terracotta brown with the scored lines slightly darker.
Gallery
The studio ships one render with this kit, so this is the whole gallery.

Links
- Want it printed? Get the unpainted kit in the store.
- Studio Patreon: Moon Figures on Patreon
- Studio store: Moon Figures on Gumroad
- Cults3D: Moon Figures on Cults3D · Rio Futaba on Cults3D
- My listing: none yet; this kit has not been printed.