Happy Keycaps by NomNom Figures - Kit Overview

Three Cherry-MX-style keycaps with Happy's face sculpted on top — Angry, Happy, and Shy — each about 19 mm square and 11 mm tall, and presupported.

Share
Three blue cat-face keycaps on a white mechanical keyboard showing shy, delighted, and angry expressions, seen from the left.

Happy, the blue Exceed from Fairy Tail, by NomNom Figures. This is not a figure. It is a set of three keycaps with Happy's face sculpted on top, one expression each, and what is notable is how much face the studio fit into a 19 mm square: eyebrows, whiskers, tears, a tongue, paws, and a scarf knot, all readable in the renders at keyboard distance.

At a glance

  • Studio: NomNom Figures
  • Character and source: Happy, from Fairy Tail
  • Section: Anime
  • Versions and sizes (H×W×L): three alternate faces, each one keycap. Angry 11.2 × 19.3 × 19.9 mm; Happy 11.3 × 19.5 × 19.7 mm; Shy 11.2 × 18.1 × 19.5 mm. Sizes are from the STL bounding boxes; there is no scale sheet in this release.
  • Parts per version: 1
  • Presupports: all three faces, as NOM_Happy_<expr>_Supported.stl in Presupports/STL/ with a matching .lys for each in Presupports/Lychee/
  • Largest part per version and plate fit: the keycap itself in every case. Supported, the biggest box is NOM_Happy_Angry_Supported.stl at 20.0 × 21.8 × 24.0 mm. All three fit Mars-class and Saturn-class in any orientation.
  • Ratings (estimated): Print 2/5, Assembly 1/5, Paint 2/5. Skill tag: beginner.
  • Status: files reviewed, not printed
  • Where to get the files: NomNom Figures' Patreon and Cults3D store, linked at the bottom.

I wrote this from the studio's files and renders. Nothing here has been printed yet.

The model

The three renders show the same scene from three distances: a white and lavender mechanical keyboard with the three Happy caps sitting in the number row between the #3 and &7 keys, so they take the 4, 5, and 6 positions. Each cap is a Cherry-profile-looking block with Happy's head and forepaws rising out of the top surface. The body is Happy's medium blue throughout, with pink inner ears, white eye whites, and a green scarf knot at the bottom edge of every cap.

Reading the renders left to right and matching them to the file names: the left cap is Happy_Shy.stl. Eyebrows tilted up in the middle, round eyes looking off to one side, a single light-blue tear at the corner of one eye, pink blush marks across the cheeks, and both paws clasped together under the chin. The middle cap is Happy_Happy.stl. The eyes are the starburst-white "dazzled" eyes with a four-point cross where the pupils would be, the mouth is wide open with a red tongue out, and both paws are up beside the face, pads facing out. The right cap is Happy_Angry.stl. Brows slammed down in a V, mouth open in a square yell showing a full row of white teeth over a pink interior, two tear drops on the cheeks, and one paw gripping a yellow-green object at the right edge of the cap. It looks like a fish from the tail shape, but no render shows it clearly.

Identifying details are the ones that make Happy Happy: the rounded cat ears with pink insides, three black whisker lines per cheek, the black nose, and the green scarf tied at the throat. The whiskers, brows, and nose are raised lines on the surface, not paint-only, which matters for both printing and painting at this size.

There is no base and no scene inside the files; the keyboard in the renders is the studio's staging, not part of the download. The footprint is the keycap square, about 19 by 20 mm, and the silhouette above it is the ears, the raised paws, and on the Angry cap the object in the paw.

Versions and sizes

  • Angry (Happy_Angry.stl)
    • H×W×L (mm, STL box): 11.2 × 19.3 × 19.9
    • Pieces: 1
    • Presupported: yes, .stl + .lys
  • Happy (Happy_Happy.stl)
    • H×W×L (mm, STL box): 11.3 × 19.5 × 19.7
    • Pieces: 1
    • Presupported: yes, .stl + .lys
  • Shy (Happy_Shy.stl)
    • H×W×L (mm, STL box): 11.2 × 18.1 × 19.5
    • Pieces: 1
    • Presupported: yes, .stl + .lys

The 11 mm axis is the cap's height including the sculpted face; the two ~19 mm axes are the footprint. I am reading the height off the report's bounding box, since no render shows the cap from the side with a ruler.

All three are the same job. Pick by expression, or print the set: the renders only ever show them as a trio on adjacent keys, and the three faces are clearly designed to be read together. If you print one, the Happy face is the most recognizable Happy on its own; Shy and Angry read better with the middle one for contrast.

About the sizes. Every measurement in this post comes from the sculptor's files or the studio's published size information for the unprinted model. A printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

What's in the download

Angry

  • Happy_Angry.stl: Keycap, yelling face, tears, paw holding an object
    • Size mm: 19.3 × 11.2 × 19.9
    • Notes: Single piece. 1.33 M triangles, see below.

Happy

  • Happy_Happy.stl: Keycap, dazzled eyes, tongue out, paws up
    • Size mm: 19.5 × 11.3 × 19.7
    • Notes: Single piece. Tongue and raised paw pads are the finest raised detail.

Shy

  • Happy_Shy.stl: Keycap, worried brows, blush, paws clasped under chin
    • Size mm: 18.1 × 11.2 × 19.5
    • Notes: Single piece. Narrowest of the three.

Presupported copies: NOM_Happy_Angry_Supported.stl (20.0 × 21.8 × 24.0 mm), NOM_Happy_Happy_Supported.stl (19.9 × 23.3 × 24.0 mm), NOM_Happy_Shy_Supported.stl (22.1 × 23.3 × 23.9 mm), plus one .lys per part. All three supported files are heavier than raw; the extra is supports, and the studio did not hollow anything. That is what I would expect for a keycap; the cap is already a shell open at the bottom for the switch stem.

One odd thing in the folder. Happy_Angry.stl is 1,330,754 triangles against 305,108 for Happy_Happy.stl and 273,564 for Happy_Shy.stl. Same size part, four times the mesh. There is no visible reason for it in the renders, and at 19 mm a printer cannot resolve the difference. It will slice slower and the file is heavier; it will not print better. The supported version carries the same density (1,354,350 triangles).

No render shows the underside of any cap, so I cannot say what stem it has or whether it is Cherry MX cross, and I am not going to guess.

2/5 (estimated). Presupported, tiny, and every part fits a Mars-class plate with room for the whole set many times over.

What keeps it off a 1: the ears stand up from the top surface and are thin at the tip; the whiskers, brows, and tear drops are raised lines and beads under a millimetre thick that need a fine layer height to survive; the raised paws on the Happy cap and the object in the Angry cap's paw overhang the face and depend on the studio's supports. The cap is also a cup by nature. At 19 mm across the suction on a cup this small is minor, but the bottom edge is where I would expect supports and I would keep the studio's orientation rather than lay it flat.

The 1.33 M-triangle Angry mesh is a slicing-time issue, not a print-quality one. If Lychee or Chitubox stalls on it, decimating to the density of the other two would lose nothing visible.

Assembly difficulty

1/5 (estimated). Each keycap is one piece. There is nothing to glue, pin, or align. The only assembly is pushing it onto a switch, which depends on the stem question flagged above. Whatever a support nub leaves on the bottom rim needs sanding so the cap seats level.

Paint difficulty

2/5 (estimated). By material count this is a beginner job: one body blue, pink, white, black, green, and a light blue for the tears. By size it is not quite. The eyes are roughly 3 to 4 mm across on the Happy cap and the pupils on Shy and Angry are dots inside that. The whiskers are hairlines. The teeth on the Angry cap are a row of individual white blocks maybe a millimetre each. A fine brush and a magnifier, or the willingness to accept a looser face, are the real requirement here. Because the details are raised, a dark wash and a careful drybrush will pick out whiskers and brows without freehand; the eyes still have to be painted in.

Paint reference (from the studio's colored renders). Body, ears, paws, and the cap sides: one medium sky blue, slightly darker in the shadowed creases. Inner ears: pink. Eye whites: white; pupils, brows, whisker lines, nose, and mouth outline: black. Happy cap eyes: white with a black four-point cross. Tongue and mouth interior: red-pink; teeth on the Angry cap: white. Tear drops: light blue, lighter than the body. Blush on the Shy cap: soft pink across both cheeks. Paw pads (Happy cap): dark, near-black. Scarf knot at the bottom of each cap: mid green. Object in the Angry cap's paw: yellow-green.

Three blue cat-face keycaps on a white mechanical keyboard showing shy, delighted, and angry expressions, seen from the left.
Close three-quarter view from the left of all three caps in the number row, Shy nearest the camera, then Happy, then Angry, with the #3 and &7 keys at either end and R, T, Y below. Best single view of the raised paws, the tear drops, and the object in Angry's paw.
Three Happy keycaps on a keyboard seen from the right, the angry face in front.
The same row from the right side, Angry nearest the camera. Shows the Angry cap's teeth and open mouth head-on, the side of the Happy cap with the scarf knot at its base, and the Shy cap's clasped paws in profile.
A white and lavender mechanical keyboard with three blue Happy face keycaps in the number row.
Pulled back to show most of the keyboard, the three caps in place at 4, 5, 6 on the top row beside the USB cable. The only view that shows the caps at real scale against a full board and how they sit relative to the standard caps around them.