Chibi Moogle King Mog XII by NomNom Figures - Kit Overview

A chibi Moogle King floating over a cloud base with an archer moogle and a knight moogle at his feet. Eleven presupported parts, 86 mm tall, one version. Reviewed from the files and renders, not printed yet.

Share
A white chibi moogle in a red and gold crown floats above pastel clouds holding a gold staff, with a moogle archer and a moogle knight standing on the clouds below.

Chibi Moogle King Mog XII, from Final Fantasy, by NomNom Figures. I haven't confirmed which Final Fantasy game it's from.

A crowned moogle king with a staff floats above a swirl of clouds while an archer moogle and a knight moogle stand guard below. What's notable is the base: two cloud pieces and a gold ribbon ring are the three largest parts in the kit, and the attendant moogles are tiny next to them.

At a glance

This post is written from the studio's files and renders. I have not printed this kit yet.

  • Studio: NomNom Figures
  • Character and source: Moogle King Mog with an archer moogle and a knight moogle, chibi. Final Fantasy; I haven't confirmed which game.
  • Section: Fan art (game)
  • Versions and sizes: one version, Chibi. 86 mm H × 55 mm W × 66 mm L, from the studio's scale sheet.
  • Parts: 11
  • Presupports: yes, all 11 parts, as NOM_<name>_Supported.stl plus a matching Lychee .lys for each.
  • Largest part and plate fit: Base Upward Clouds.stl at 65.0 × 48.2 × 39.2 mm raw, 68.5 × 32.8 × 61.9 mm supported. Every part fits a Mars-class plate (143 × 90 × 175 mm).
  • Ratings (estimated): Print 2/5, Assembly 3/5, Paint 3/5. Skill tag: intermediate.
  • Status: files reviewed, not printed.
  • Where to get the files: NomNom Figures' Patreon and Cults3D store, linked at the bottom.

The model

The king is the center of the scene and he is in the air. His body leans forward and to the left of the viewer with the staff held out in his left paw, feet dangling, bat wings spread behind him. He isn't sitting on the clouds so much as hovering just above the highest one, and the Base Upward Clouds.stl piece rises to meet him. The two attendants stand on the lower cloud mound at the front corners. The archer on the viewer's left is drawing a bow with a nocked arrow. The knight on the right has a sword raised in his right paw and a round shield on his left.

The identifying details are all moogle standard, done chibi. Each of the three has a white body, cat ears, a red ball nose, closed eyes drawn as two curved lines, small bat wings on the back, and a pom-pom on a stalk rising from the head. The pom-poms are orange-amber. The king has curled mustache tendrils off his cheeks and a thick ruff of fur under his chin that reads as a beard.

Costume, item by item, from the colored renders. The king's crown is red with gold bands and a gold star at the top of the pom stalk. The staff has a black shaft with gold ferrules at each end and a gold bird head on top. The archer wears a brown cap with a gray-blue feather and carries a brown bow with a silver arrowhead. The knight's helmet is bronze-brown with a lighter gold band and nose guard, the sword has a silver blade with a brown grip, and the shield is a round wooden disk with gold rim and boss. The wings on all three are a dark brown.

Faces are cartoon and closed-eyed on all three. There is no eye to paint, just the two arcs, the nose, and on the king the mustache curls.

The base is three pieces. Base Clouds.stl is the lower mound, with cut crystals in teal set into it. Base Upward Clouds.stl is the tall swirl of cloud plumes that frame the king from behind, with small four-pointed stars scattered over them. Base Lace.stl is a gold ribbon ring that wraps around the outside of the base with a star at the front and the ribbon ends curled up at the back. In the renders the clouds are painted pink at the tips shading into lavender and pale blue at the bottom.

The silhouette is a tall teardrop. The king and his crown and staff make the top half; the cloud plumes fill in behind him; the ribbon ring is the widest thing at the bottom. The footprint is the 55 × 66 mm base, and the ribbon ring is what sets it.

Versions and sizes

  • Chibi
    • H × W × L (mm): 86 × 55 × 66
    • Pieces: 11
    • Presupported: Yes, all 11 parts (STL + Lychee .lys)

One version only. At 86 mm it's a desk-corner or shelf piece, and everything fits a Mars-class plate in one go. It suits someone who wants a small diorama with a few characters rather than a single figure, and who is comfortable with tiny parts.

About the sizes. Every measurement in this post comes from the sculptor's files or the studio's published size information for the unprinted model. A printed kit can differ slightly: resin shrinks a little as it cures, removing supports and sanding takes off some material, and the assembled height depends on how the parts are fitted. Treat the numbers as a close guide, not an exact guarantee.

What's in the download

All dimensions are from the raw STLs in STL/.

Figure (king)

  • King Moogle Head.stl: Head with ears, closed eyes, nose, mustache curls
    • Size (mm): 35.7 × 31.5 × 23.9
    • Notes: Peg under the head in the parts layout
  • King Moogle Body.stl: Body with fur ruff, wings, two feet
    • Size (mm): 26.6 × 28.3 × 29.1
    • Notes: Wings are thin
  • King Moogle Crown.stl: Crown with pom stalk, star, and pom-pom ball
    • Size (mm): 26.6 × 29.6 × 26.7
    • Notes: Pom stalk is thin

Companions (archer, knight)

  • Archer Moogle Head.stl: Head with feathered cap and pom
    • Size (mm): 14.6 × 21.1 × 15.9
    • Notes: Feather is thin
  • Archer Moogle Body.stl: Body drawing a bow with arrow, wings
    • Size (mm): 17.0 × 15.6 × 17.9
    • Notes: Tiny; bow, bowstring, arrowhead are thin
  • Knight Moogle Head.stl: Head with helmet and pom
    • Size (mm): 12.4 × 20.2 × 13.2
    • Notes: Smallest part
  • Knight Moogle Body.stl: Body with raised sword and round shield, wings
    • Size (mm): 20.1 × 19.3 × 22.9
    • Notes: Tiny; sword blade is thin

Base and scene

  • Base Clouds.stl: Lower cloud mound with set crystals
    • Size (mm): 48.4 × 22.8 × 52.5
    • Notes: Heaviest part; studio hollows it in the presupports
  • Base Upward Clouds.stl: Tall cloud plumes with stars, rising behind the king
    • Size (mm): 65.0 × 48.2 × 39.2
    • Notes: Largest by footprint; plume tips are thin
  • Base Lace.stl: Gold ribbon ring around the base with a front star
    • Size (mm): 58.6 × 27.2 × 49.1
    • Notes: Thin open ring, fragile

Accessories

  • King Moogle Staff.stl: Staff with bird head, ferrules, black shaft
    • Size (mm): 10.8 × 40.0 × 14.7
    • Notes: Thin rod, fragile

Presupports: Presupports/STL/ has all 11 parts as NOM_<name>_Supported.stl, and Presupports/Lychee/ has the 11 matching .lys files. No text file, readme, or link file in the folder. Nothing odd about the folder layout; it's the standard NomNom split.

How the parts join isn't fully visible in the renders. The parts layout shows a peg under the king's head. I can't see whether the crown, the attendants' heads, or the staff have pegs or sockets.

2/5 (estimated).

Everything is presupported and everything fits a Mars-class plate in its flat orientation. The largest supported file, NOM_Base Upward Clouds_Supported.stl, is 68.5 × 32.8 × 61.9 mm. No part comes close to the plate limits.

What keeps this from a 1 is the thin stuff. King Moogle Staff.stl is a very thin rod over a 40.0 mm length, close to the width of a support tip. Base Lace.stl is spread thin over 58.6 × 49.1 mm, an open ring of ribbon that will flex on the plate and needs a careful peel. The two attendant bodies are tiny, with a bow, bowstring, arrowhead, and sword blade hanging off them. The pom stalks on all three heads and the crown are thin cylinders with a ball on top.

There are no large flat or cupped surfaces. The cloud mound is a lump, and the presupported version of Base Clouds.stl is lighter than the raw file, so the studio hollowed it. Base Upward Clouds.stl goes the other way: its supported file is heavier than the raw one, so that one is either solid or the hollowing is outweighed by the supports; the files alone don't say which. If you print from the raw STLs you'll want to hollow the cloud mound yourself and add drain holes.

All 22 files have no degenerate triangles, so the meshes read cleanly.

Assembly difficulty

3/5 (estimated).

Eleven pieces, which puts it in the 10–20 band. The joins I can see: king head to body, crown to head, staff to the king's paw, archer head to body, knight head to body, the king to the upward clouds, the upward clouds to the cloud mound, the two attendants to the cloud mound, and the ribbon ring around everything.

The king-to-cloud join is the one to plan. He hovers with his feet at the cloud tip, so that contact patch carries the head, crown, staff, and body on a small area. From the renders I can't tell whether there's a peg there. If not, a pin is a good idea.

The head-to-body seam on the king sits behind the fur ruff, which should hide it. The attendant heads sit on bodies that are 17–23 mm across, so those seams are small but on a smooth white surface. The staff is 40 mm long and very thin, and it has to reach the king's paw at an angle; I'd expect to pin it or glue it last.

Base Lace.stl is an open ring that has to sit around the cloud mound without a visible gap. It's a thin part that will want to spring, and where the ends meet at the back is where any misalignment shows.

Paint difficulty

3/5 (estimated).

The faces are cartoon: closed-eye arcs, a red nose ball, no eyes to paint. That part is easy. What raises the rating is the materials count and the clouds.

Materials: white moogle fur (smooth, no sculpted texture), red velvet on the crown, gold on the crown bands, staff, stars, helmet trim, shield rim, and ribbon; black on the staff shaft; brown wood on the bow, shield, sword grip, and archer's cap; bronze-brown on the helmet; silver on the arrowhead and sword blade; dark brown on the six wings; teal on the crystals; and the pastel clouds. That's more than four materials across the piece, and the gold and silver are metallics next to matte white, so the edges need to be clean.

The clouds are a gradient in the renders, pink at the plume tips down through lavender to pale blue at the base. That's a smooth blend over the two largest parts, and it's the one thing on this kit that takes an airbrush or patient layering to match. Painted in a single flat color they'd still look fine, which is why this is a 3 and not higher.

Small details: eleven four-pointed stars scattered over the clouds and ribbon, the crown rivets, the helmet band, the shield boss, the feather, and the mustache curls.

Paint reference. From the studio's colored renders: moogle bodies, heads, and the king's fur ruff in warm white; noses in bright red; pom-pom balls in orange-amber; wings in dark chocolate brown; crown in deep red with gold bands, rivets, and star; staff with a black shaft, gold ferrules, and a gold bird head; archer's cap in medium brown with a gray-blue feather; bow in medium brown, arrowhead in silver; knight's helmet in bronze-brown with a pale gold band and nose guard, sword blade in silver with a brown grip, shield in wood brown with gold rim and boss; clouds in pink at the tips through lavender to pale blue at the bottom; crystals in teal; ribbon ring in gold; stars in gold.

A white chibi moogle in a red and gold crown floats above pastel clouds holding a gold staff, with a moogle archer and a moogle knight standing on the clouds below.
Full colored front view of the whole scene on a dark blue backdrop: the king floating with staff out and crown on, the archer at front left drawing his bow, the knight at front right with sword up and shield on his back, pink-to-blue clouds behind, teal crystals and gold ribbon at the base. This is the only full-scene color view, and the reference for the whole color scheme.
Close-up of a small white moogle wearing a bronze helmet, raising a silver sword, with a round wooden shield at its side.
Close-up of the knight moogle from the front right: bronze helmet with pale gold band and nose guard, closed eyes, red nose, small whiskers, silver sword raised, round wooden shield with gold rim, dark wings, orange pom, gold ribbon and teal crystals in the foreground. The only view that shows the helmet detail and shield face clearly.
Close-up of a small white moogle in a brown feathered cap drawing a wooden bow with a silver-tipped arrow.
Close-up of the archer moogle from the front left: brown cap with gray-blue feather, closed eyes, red nose, brown bow drawn with a silver-tipped arrow, dark wings, orange pom, a gold star at left, pastel clouds behind. The only view that shows the cap, feather, and bow up close.
Eleven color-coded 3D printing parts laid out flat, including three moogle heads, three bodies, a crown, a staff, two cloud pieces, and a ribbon ring.
Color-coded parts layout on a gray slab, labeled CHIBI, 11 PARTS: king head (red), crown (orange), cloud mound (tan), upward clouds (green), ribbon ring (teal), king body (purple), knight head (blue), archer body (gold), knight body (magenta), archer head (pink), staff (green). Shows the peg under the king's head and that the ribbon ring is open at the back.
Dimension sheet showing the assembled moogle king scene in part colors at 86 mm tall, 55 mm wide, and 66 mm long.
Front three-quarter view of the split model in part colors on a black backdrop, labeled CHIBI, with dimensions H 86 mm, W 55 mm, L 66 mm. The only image with dimensions and the only one that shows the parts assembled in their color coding.
Unpainted gray front view of the moogle king floating above cloud plumes with two attendant moogles below.
Gray front view of the full scene on a blue backdrop, no color. Shows the sculpted detail of the fur ruff, the cloud swirls, and the stars without the paint.
Unpainted gray three-quarter view of the moogle king scene from the front left.
Gray front-left three-quarter view. Shows the king's left side, the staff crossing in front of his wing, the archer's bow from the side, and how the ribbon ring wraps around the cloud mound.
Unpainted gray view of the moogle king scene from the rear left, showing the wings and cloud plumes.
Gray rear-left three-quarter view. Shows the king's wing from behind, the archer's feather and wings from the back, the knight's helmet from above, and the tallest cloud plume rising behind the king.
Unpainted gray rear view of the moogle king scene, showing the wings, the back of the cloud plumes, and the ribbon ends.
Gray rear view. Shows the king's back and tail-side of the crown, both bat wings spread, the back of the cloud plumes, and the two curled ends of the ribbon ring at the rear of the base. The only view of the ribbon's open ends and the back of the clouds.